CF card GPS for NEMA input into FG

Discussion of FieldGenius related issues and questions.

Moderators: Brian Sloman, Jason Poitras, James Johnston

CF card GPS for NEMA input into FG

Postby mlbrack » Mon Apr 12, 2010 7:23 am

Just a quick recommendation for all FG users....

For a total investment of about $70 you can add a compact flash gps card for WAAS-enabled positioning directly from your data collector.

It's perfect for reconnaissance or trying to relocate monuments, etc. without lugging around your whole rover rig or setting up a base station.

The CF card gps uses a NEMA output, which can be configured by FG.

I purchased Globalsat BC-337 recievers, which on inital testing generates coordinates at about 1.5-2 m RMS with a WAAS message.

You'll probably also have to buy an extended cap for you data collector to keep everything protected. That will run about $100 for Trimble/TDS products.
mlbrack
 
Posts: 49
Joined: Wed Jul 06, 2005 1:36 pm

Re: CF card GPS for NEMA input into FG

Postby Jason Poitras » Fri May 07, 2010 6:07 am

Thank you Mike for the good information!
Jason Poitras
General Manager
[email protected]
User avatar
Jason Poitras
Site Admin
 
Posts: 443
Joined: Tue Oct 29, 2002 5:17 pm
Location: Kelowna, BC, Canada


Return to FieldGenius

Who is online

Users browsing this forum: No registered users and 1 guest