New Trimble M3 drivers

Discussion of FieldGenius related issues and questions.

Moderators: Brian Sloman, Jason Poitras, James Johnston

New Trimble M3 drivers

Postby Claudio Vazquez » Fri Jul 23, 2010 5:25 pm

Hi,
recently I bought a new Trimble M3, I tried with “Nikon New Series” drivers and works well in every EDM mode but the driver doesn´t support features like Set Angle, Laser Pointer, Guide Lights and Check Level.
There are somebody working with the same total station and another driver with best results?
The MS team are planning adding new driver for Trimble M3 (seams to be the same that the New Nikon Nivo and Spectra Focus 8) in a short time?

In the other hand I am working with an -18mm offset prism supplied in the box and is not easy changing the prism offset in the Instrument Selection menu every time I change the prism position,
Trimble Digital Fieldbook included in the TS software has the possibility to change it directly en the main screen.

thanks
Claudio Vazquez
 
Posts: 7
Joined: Fri Mar 07, 2008 9:59 am
Location: Montevideo, Uruguay

Re: New Trimble M3 drivers

Postby Jason Poitras » Wed Aug 25, 2010 11:04 pm

No plans currently to support this instrument, we may in the future if we get more interest.
Jason Poitras
General Manager
[email protected]
User avatar
Jason Poitras
Site Admin
 
Posts: 443
Joined: Tue Oct 29, 2002 5:17 pm
Location: Kelowna, BC, Canada

Re: New Trimble M3 drivers

Postby Claudio Vazquez » Thu Aug 26, 2010 1:44 pm

Ok, thanks Jason
Claudio Vazquez
 
Posts: 7
Joined: Fri Mar 07, 2008 9:59 am
Location: Montevideo, Uruguay


Return to FieldGenius

Who is online

Users browsing this forum: No registered users and 1 guest