FG2004 default project folder!

Discussion of FieldGenius related issues and questions.

Moderators: Brian Sloman, Jason Poitras, James Johnston

Post Reply
pasurvey
Posts: 31
Joined: Tue Jul 06, 2004 10:39 am
Location: Arlington, Vermont

FG2004 default project folder!

Post by pasurvey » Tue Jul 06, 2004 10:45 am

Loaded latest upgrade to FG2004 on Ipaq 2215. Default project folder is \microsurvey\fieldgenius\fgprojects\ and I have to set it to my location of \cf card\fgprojects. Is there a way to set this as the default. Wish to keep data safe!
LP

User avatar
Jason Poitras
Site Admin
Posts: 443
Joined: Tue Oct 29, 2002 5:17 pm
Location: Kelowna, BC, Canada
Contact:

Post by Jason Poitras » Tue Jul 06, 2004 8:29 pm

Sounds like you may have installed FieldGenius 2004 to your main memory. By default the default project directory should be the location that FieldGenius was installed to.

Do you recall if you pressed NO to the message that appears during the install, "Install to the default location?" If you didn't, then the default location would be your system RAM. If you press NO, then you will be prompted to select the location for the install, which at that time you can select the CF Card.

You can correct this by un-installing FieldGenius on the iPAQ. Then run the install again and make sure to press NO to the message I mention above.
Jason Poitras
General Manager
jason.poitras@microsurvey.com

Post Reply