Point information dose not print

Discussion of MicroSurvey CAD related issues and questions.

Moderators: Brian Sloman, Jason Poitras, James Johnston

Post Reply
aspani
Posts: 4
Joined: Tue Oct 24, 2006 3:39 pm
Location: Sechelt BC

Point information dose not print

Post by aspani » Tue Oct 24, 2006 6:25 pm

Hi

Printing problem
I can see the text info for the points, point number, description, on the screen however when I do a print preview it dose not show up, any help would be appreciated

Thanks

Al Spani

Glen Cameron
Posts: 1395
Joined: Fri Nov 08, 2002 12:18 pm
Location: Corbeil, Ontario, Canada
Contact:

Post by Glen Cameron » Wed Oct 25, 2006 5:00 am

Check your layer dialog and make sure that the layers for the text in question are not set to NO under the PRINT column. If they are set to NO then those layers do not plot. Change them back to YES and then they should plot.

Cheers,
Glen W. Cameron, C.E.T.
City of North Bay, Ontario

aspani
Posts: 4
Joined: Tue Oct 24, 2006 3:39 pm
Location: Sechelt BC

Post by aspani » Wed Oct 25, 2006 6:30 pm

Yes that was the problem

Thanks

Al

Post Reply