Plotter info

Discussion of MicroSurvey CAD related issues and questions.

Moderators: Brian Sloman, Jason Poitras, James Johnston

Post Reply
azstew
Posts: 33
Joined: Sun Oct 09, 2005 8:07 am

Plotter info

Post by azstew » Mon Nov 27, 2006 4:36 pm

I need to replace an dying HPDJ 330.

We have a DesignJet 430 at the office, so this would be my replacement home office printer, and back-up, in case the office printer goes down.


I'm looking at the HP 110 Plus.
Does it co-operate with MSCad well?
(It took some time to figure out the 330)

Should I look elsewhere?

Anyone got any favorites?

All suggestions/opinions welcomed.
Thx!

Glen Cameron
Posts: 1395
Joined: Fri Nov 08, 2002 12:18 pm
Location: Corbeil, Ontario, Canada
Contact:

Post by Glen Cameron » Tue Nov 28, 2006 6:57 am

MSCAD basically uses the Windows driver for printing/plotting. So as long as you have the current driver installed in your computer, we should be able to use this device (or any other make/model). As with all drivers, you may need to set things for your system, such as paper sizes, etc.

From inside MSCAD you simply pick the driver to use, and then configure the print command to do what you require - then print!

Cheers,
Glen W. Cameron, C.E.T.
City of North Bay, Ontario

Post Reply