Cannot print in 2005

Discussion of MicroSurvey CAD related issues and questions.

Moderators: Brian Sloman, Jason Poitras, James Johnston

Post Reply
DZim
Posts: 15
Joined: Thu Aug 11, 2005 4:31 am

Cannot print in 2005

Post by DZim » Wed Dec 26, 2007 10:28 am

I cannot get MS2005 to print any area I select. The program changes the location of the print window, and I'm stuck loading the drawing in 2004 just to print. Any idea how I can get around this snag?
---------------------------------

Richard Sands
Posts: 425
Joined: Mon Feb 14, 2005 1:10 pm
Location: Tasmania

PRINT ISSUE

Post by Richard Sands » Wed Dec 26, 2007 2:19 pm

What happens if you close 2005 and restart, open the job and try printing - does that allow you to print?
Are you in model or paper space?
Do you have 'Print only area within specified window' ticked? What is the setting of 'Print offset'?
regards, Richard

Alex Leonard
Posts: 42
Joined: Sat May 13, 2006 7:47 pm
Location: Kona, Hawaii

Post by Alex Leonard » Wed Dec 26, 2007 7:52 pm

In paper-space, sometimes the selected print area doesn't "stick", and often, the page offset settings don't "stick".
Usually, all it takes is to get into print settings a second time.

I "center" almost all of my printouts, and have to re-check the the "center page" on the advanced tab of "Print Settings" almost everytime (otherwise the output is offset as you describe).

Alex

Post Reply