description Translation library

Discussion of MicroSurvey CAD related issues and questions.

Moderators: Brian Sloman, Jason Poitras, James Johnston

description Translation library

Postby John Gallagher » Wed Nov 20, 2002 8:32 am

I just set up a description translation library on one computer in the office and would like to copy it to another computer.I took a look in the MSCAD2002 folder hoping to see a file just modified that on opening would be the library,and I could then just copy it over to the second machine.
So far I haven't seen or opened anything that fits the bill.Is it possible to just copy the library from one computr to another or will it have to be manually entered on each?
Thanks for any help,
John Gallagher
John Gallagher
John Gallagher
 
Posts: 62
Joined: Fri Nov 08, 2002 1:35 pm
Location: Long Island New York

Postby Mark Budgen » Wed Nov 20, 2002 8:49 am

Hi John,

Look for the following files on the computer with the correct Description Translation Library:

IC_CCPD.DEF
IC_CCPD.MP
IC_CCPD.NX
IC_CCPD.ST

These are found in the \mscad2002\mscad directory. Please copy all of these files (4 in total) to the other computer and place tham in the same folder (overwrite the existing files). This will copy the DTL to the other computer. I hope this helps.
Mark Budgen
 

description Translation library

Postby John Gallagher » Wed Nov 20, 2002 9:02 am

Thank's Mark.That did the trick.
John Gallagher
John Gallagher
John Gallagher
 
Posts: 62
Joined: Fri Nov 08, 2002 1:35 pm
Location: Long Island New York


Return to MicroSurvey CAD

Who is online

Users browsing this forum: No registered users and 3 guests

cron