EXPORTING WITH AN IMAGE INVOLVED.

Discussion of MicroSurvey CAD related issues and questions.

Moderators: Brian Sloman, Jason Poitras, James Johnston

EXPORTING WITH AN IMAGE INVOLVED.

Postby hiscock_wayne » Tue Aug 02, 2011 1:42 pm

I can't seem to export my drawing to pdf and have it keep its image (where I raster in my companies logo in the bottom corner of the drawing). Any suggestions other than plotting from cad and scanning as a pdf?
WAYNE HISCOCK, C.E.T. / B.A
User avatar
hiscock_wayne
 
Posts: 10
Joined: Tue Aug 02, 2011 8:48 am
Location: Western Canada

Re: EXPORTING WITH AN IMAGE INVOLVED.

Postby Richard Sands » Tue Aug 02, 2011 2:25 pm

Is the logo layer 'printable'" That is - is it set to 'not print'?

I don't have any problem with bmp logo's.

Sometimes I just insert the logo into the PDF.
Can you do that?
Richard Sands
 
Posts: 424
Joined: Mon Feb 14, 2005 1:10 pm
Location: Tasmania

Re: EXPORTING WITH AN IMAGE INVOLVED.

Postby hiscock_wayne » Tue Aug 02, 2011 9:11 pm

I put my logo on a normal layer and all is printable.......but when I export the dwg to pdf......everything works fine except the logo.
WAYNE HISCOCK, C.E.T. / B.A
User avatar
hiscock_wayne
 
Posts: 10
Joined: Tue Aug 02, 2011 8:48 am
Location: Western Canada

Re: EXPORTING WITH AN IMAGE INVOLVED.

Postby fjt_aus » Tue Aug 02, 2011 10:11 pm

Are you exporting to a pdf or printing to a pdf?
fjt_aus
 
Posts: 32
Joined: Fri Oct 27, 2006 8:24 pm
Location: South Australia

Re: EXPORTING WITH AN IMAGE INVOLVED.

Postby hiscock_wayne » Wed Aug 03, 2011 9:25 am

I'm exporting to file sir.
WAYNE HISCOCK, C.E.T. / B.A
User avatar
hiscock_wayne
 
Posts: 10
Joined: Tue Aug 02, 2011 8:48 am
Location: Western Canada

Re: EXPORTING WITH AN IMAGE INVOLVED.

Postby fjt_aus » Wed Aug 03, 2011 3:43 pm

I suspect that is where your problem may lie, especially if the logo is there when you print onto paper. (But if it's not...i dunno)

If you don't have one, get yourself some pdf creation software for your computer. There are plenty of free ones out there (I use PDFCreator). Once it is installed you just go to print your dwg as you would if you were sending it to a real printer, but select the pdf printer instead.

Oh, I'm a she, not a he. :)
fjt_aus
 
Posts: 32
Joined: Fri Oct 27, 2006 8:24 pm
Location: South Australia

Re: EXPORTING WITH AN IMAGE INVOLVED.

Postby Edward Gasbarre » Thu Aug 04, 2011 3:33 am

This could be a DRAW ORDER issue in the CADD drawing. cad tools_draw order_Front.
Edward Gasbarre
 
Posts: 8
Joined: Wed Oct 08, 2008 3:48 am

Re: EXPORTING WITH AN IMAGE INVOLVED.

Postby hiscock_wayne » Thu Aug 04, 2011 1:23 pm

Thanks for all your advice everyone......I'll try some of those different methods.

PS Sorry for the gender mishap "fjt_aus". My apologies! :)
WAYNE HISCOCK, C.E.T. / B.A
User avatar
hiscock_wayne
 
Posts: 10
Joined: Tue Aug 02, 2011 8:48 am
Location: Western Canada


Return to MicroSurvey CAD

Who is online

Users browsing this forum: Google [Bot] and 1 guest