auto distance and bearing

Discussion of MicroSurvey CAD related issues and questions.

Moderators: Brian Sloman, Jason Poitras, James Johnston

Post Reply
Rick W.
Posts: 7
Joined: Mon Sep 13, 2004 7:34 am
Location: Carleton Place Ont.
Contact:

auto distance and bearing

Post by Rick W. » Thu Nov 04, 2004 12:33 pm

Every time a use the auto distance or bearing the text allways face's left
Its east to reverse it but is a pain.Is there a setting somewhere???

Rick
Rick

Glen Cameron
Posts: 1395
Joined: Fri Nov 08, 2002 12:18 pm
Location: Corbeil, Ontario, Canada
Contact:

Label text direction

Post by Glen Cameron » Thu Nov 04, 2004 7:58 pm

All lines drawn so they radiate out to the 1st or 2nd quadrant are labeled so the Bearing and Distance are read from under the line looking towards the line.

All lines drawn so they radiate out to the 3rd or 4th quadrant are labeled so the Bearing and Distance are read from under the line looking towards the line.

There are no toggles to change this.

Cheers,
Glen W. Cameron, C.E.T.
City of North Bay, Ontario

Post Reply