Help for Scanned image

Discussion of MicroSurvey CAD related issues and questions.

Moderators: Brian Sloman, Jason Poitras, James Johnston

Help for Scanned image

Postby Stephen_P » Sat Apr 02, 2005 1:41 pm

Thanks for always quick response.

I have a plan. Can I scan this plan into computer and setup
as backgroup in MSCAD, so I can estimate the text height needed for
print without measuring with a scaler.

I read posts for part one, I tried to write drawing into external file
without creating internal part first, but I failed to do that. Does that
mean still need create internal part prior to exporting to external file.

Thanks again.
Stephen_P
 
Posts: 47
Joined: Sat Oct 30, 2004 11:35 am

Rasters

Postby Glen Cameron » Sun Apr 03, 2005 1:49 pm

MSCAD2004 can bring in a raster (scanned) image and place it on screen. Just run the IMAGE command to do so. You may need to scale the raster after it is placed, to get it to the correct size. You can also move it if required. Just use the CAD commands to modify the raster as required.

When writing an external part - if you already have parts in this drawing, on the dialog that comes up listing the parts, there is a SELECT button. Use this to manually pick the entities that you wish to include in the external part you are creating. The part does not need to be created in the current drawing prior to creating it as an external part.

The tech note found here may help http://www.microsurvey.com/support/shar ... -parts.htm

Cheers,
Glen W. Cameron, C.E.T.
City of North Bay, Ontario
Glen Cameron
 
Posts: 1395
Joined: Fri Nov 08, 2002 12:18 pm
Location: Corbeil, Ontario, Canada


Return to MicroSurvey CAD

Who is online

Users browsing this forum: Bing [Bot] and 2 guests

cron