Newbie here

Discussion of MicroSurvey CAD related issues and questions.

Moderators: Brian Sloman, Jason Poitras, James Johnston

Post Reply
wflux
Posts: 26
Joined: Sun Jun 26, 2005 1:12 pm
Location: Castlegar BC Canada

Newbie here

Post by wflux » Sun Jun 26, 2005 1:21 pm

This is probably a very simple problem for most of you. But for me being new to cad work, it's a stickler.

I want to put a legend with my cad drawing explaining what the symbols I used in my drawing are.

I'm not sure how to do this. Could someone please give me some hints on this?

Thanks

W Flux

Glen Cameron
Posts: 1395
Joined: Fri Nov 08, 2002 12:18 pm
Location: Corbeil, Ontario, Canada
Contact:

legend

Post by Glen Cameron » Sun Jun 26, 2005 3:49 pm

You can simply copy each symbol from the drawing over to one side then add text to describe each symbol. Set it up as you wish for spacing, etc.

That would do it.

If you wish to have the same legend in every drawing, then this could be setup as a block and inserted into each drawing.

Cheers,
Glen W. Cameron, C.E.T.
City of North Bay, Ontario

wflux
Posts: 26
Joined: Sun Jun 26, 2005 1:12 pm
Location: Castlegar BC Canada

Post by wflux » Mon Jun 27, 2005 7:13 am

Thanks for the quick response Glen. It worked great and I also saved it as a block for future use.

Walt Flux

Post Reply