Divers for GRX-400

Discussion of MicroSurvey CAD related issues and questions.

Moderators: Brian Sloman, Jason Poitras, James Johnston

Post Reply
2nv4
Posts: 2
Joined: Wed Jan 29, 2003 3:52 am
Location: Canada

Divers for GRX-400

Post by 2nv4 » Wed Jan 29, 2003 4:05 am

:? Where would be the best place to get drivers for my GRX-400 Plotter so it would work with Auto-Cad 2000. I have tried drivers from various places but I'm having trouble getting them to work. I know the plotter is recieving data but "#1 command not recognized" is displayed on LCD display. Perhaps the drivers are good and I'm not setting them up correctly? Any help or suggestions you could give me would be greatly apperciated.
Steve

Brio
Posts: 2
Joined: Wed Jan 29, 2003 8:03 am

GRX 400

Post by Brio » Wed Jan 29, 2003 8:07 am


2nv4
Posts: 2
Joined: Wed Jan 29, 2003 3:52 am
Location: Canada

http://www.rolanddg.co.jp/en/down3oad.html

Post by 2nv4 » Wed Jan 29, 2003 10:18 am

Thanks for the web site but it said Note*

Please use the original installer (setup.exe) for installation. I do not have the original (setup.exe).Do you know where I could get it?

Thanks
Steve

Brio
Posts: 2
Joined: Wed Jan 29, 2003 8:03 am

Post by Brio » Thu Jan 30, 2003 7:33 am

I will send that file to you

Post Reply