Points number

A general sounding board for non-product specific surveying issues

Moderators: Brian Sloman, Jason Poitras, James Johnston

Points number

Postby mmpoirier » Thu Jun 21, 2012 5:32 am

I have a problem with a drawing of topography that I did. I took the GPS data points to my drawing. When I incorporated them into MicroSurvey Cad, the numbers of the points were attached to the points. I've never been able to clear them. How can I do this without removing the point? thank you.
mmpoirier
 
Posts: 1
Joined: Mon Jun 04, 2012 9:38 am

Re: Points number

Postby Brian Sloman » Thu Jul 12, 2012 1:18 pm

Hi, It sounds like you are probably seeing what we call "Independent Point Numbers". These are not text entities, but more like tooltips showing the point ID. (The advantage of the IPN labels is that as you zoom in closely to the point, text entities will get bigger and perhaps even go offscreen, while the IPNs always stay the same size on the screen.) You can turn them on/off by either...
1) type IPN at the command line
2) in the menus, go to MsPoints | Independent Point Numbers | Independent Point Numbers (IPN)
3) or my favorite: turn on the "MS IPN" toolbar (right-click over any toolbars already visible, or type TBCONFIG) and use the green (N) button.
Similarly - IPD is for Descriptions, and IPE is for Elevations.
Brian Sloman
Development Manager
MicroSurvey Software Inc.
User avatar
Brian Sloman
Product Manager
 
Posts: 399
Joined: Fri Jan 07, 2005 4:42 pm
Location: Westbank, BC, Canada


Return to Surveying Topics

Who is online

Users browsing this forum: No registered users and 1 guest

cron