ENVIRONMENTAL CASE

Discussion of FieldGenius related issues and questions.

Moderators: Brian Sloman, Jason Poitras, James Johnston

Post Reply
CHRIS

ENVIRONMENTAL CASE

Post by CHRIS » Fri Dec 12, 2003 7:59 am

I am using FG in an ipac with an otter environmental case. I am having trouble with the membrane on the case. It has a bad glare and when its cold the membrane gets stiff and using the stylus gets difficult and the membrane touches other parts of the screen and activates functions I don't want. Does anybody have suggestions or reccomendations on envirnomental cases that work better.

Chris

User avatar
Jason Poitras
Site Admin
Posts: 443
Joined: Tue Oct 29, 2002 5:17 pm
Location: Kelowna, BC, Canada
Contact:

Post by Jason Poitras » Sun Dec 14, 2003 6:24 pm

Hi Chris,

How cold is it when you're experiencing these problems?
Jason Poitras
General Manager
jason.poitras@microsurvey.com

CHRIS

ENVIRONMENTAL CASE

Post by CHRIS » Mon Dec 15, 2003 2:48 pm

Hi Jason,

It was about 30-33 degrees F.

Thanks
Chris

Guest

Post by Guest » Thu Jan 15, 2004 6:50 am

I had the same problem.....put a small strip of foam tape just above the 4 way buttom to offset the clear plastic film from the ipaq ......it does get really stiff and that will keep it from stretching down and pressing other button

Chris

ENVIRONMENTAL CASE

Post by Chris » Fri Jan 23, 2004 7:12 am

Thanks for the tip. I will try your strip idea. That seems to make sense.

Thanks
Chris

Post Reply