MSCAD and NIKON 352NPL communication

Discussion of MicroSurvey CAD related issues and questions.

Moderators: Brian Sloman, Jason Poitras, James Johnston

Post Reply
GM

MSCAD and NIKON 352NPL communication

Post by GM » Fri Sep 10, 2004 3:53 pm

I am new to microsurvey MSCAD 2004 and have purchased a NIKON NPL352 total station.

Are there any other users of this combination who can confirm which instrument selection to pick going to and from the desktop computer to the instrument?

I would really appreciate your help.

GM

Michael O'Connor
Posts: 39
Joined: Wed Nov 27, 2002 10:30 am
Location: Cary, Illinois

Post by Michael O'Connor » Thu Sep 16, 2004 8:00 am

GM,

I relied on Nikon Total Stations until 1.5 years ago. I set my total stations to emulate Sokkia. This provided greater speed in the transfer of data form the total station to the data recorder. That emulation should let MicroSurvey extract info as from a Sokkia.

Michael O'Connor

glen

Nikon 352

Post by glen » Wed Sep 29, 2004 1:12 pm

To answer my own question. Nikon 700 seems to work fine. My problem was not having x flow on/off on the protocol.

Post Reply