topcon gpt 8205 reflectorless measurement

Discussion of FieldGenius related issues and questions.

Moderators: Brian Sloman, Jason Poitras, James Johnston

Post Reply
Adams
Posts: 11
Joined: Tue Mar 15, 2005 2:44 pm
Location: Norman, ok

topcon gpt 8205 reflectorless measurement

Post by Adams » Thu Apr 07, 2005 2:12 pm

When using reflectorless the total staion measurement mode is not being changed from normal to long when we switch RL FINE/RL COARSE is there something else we should be doing to be able to use the reflectorless at a range more than 300'. I switched the mode on the toltal station manually to long range then the tracker would change it back to short range in either RL FINE/RL COARSE.

User avatar
Jason Poitras
Site Admin
Posts: 443
Joined: Tue Oct 29, 2002 5:17 pm
Location: Kelowna, BC, Canada
Contact:

Post by Jason Poitras » Mon Apr 11, 2005 8:27 pm

Hello,

When you select an EDM mode in FieldGenius we make sure that the same EDM mode is set on the instrument. Sounds like we need to have an option to define normal or long range for the reflectorless EDM modes. I will add this to our feature list.
Jason Poitras
General Manager
jason.poitras@microsurvey.com

Post Reply