Unable to read backsight plate Error

Discussion of FieldGenius related issues and questions.

Moderators: Brian Sloman, Jason Poitras, James Johnston

Unable to read backsight plate Error

Postby CHRIS L » Tue May 10, 2005 9:03 am

using both a Allegro CE version w/ FG 1.1 and a Allegro CX version 1.2 I get the same error when shooting a backsight and then highlight Set zero . I'm using a Leica 1103 TRCA ... the CE is linked through the radio, the CX is linked through a direct cable.

It tells me unable to set the backsight plate reading set by user......the plate has not been modified. Then its kicked out of the entire occupy setup.....YET....it does zero the plate setting.

Thanks for any help.
Chris Lazdins
Posts: 94
Joined: Wed Aug 27, 2003 8:45 am
Location: ILLINOIS

Postby Jason Poitras » Mon May 23, 2005 8:26 am

Hi Chris,

Did the updated version of 1.2 that was posted last week fix this problem?
Jason Poitras
General Manager
[email protected]
User avatar
Jason Poitras
Site Admin
Posts: 443
Joined: Tue Oct 29, 2002 5:17 pm
Location: Kelowna, BC, Canada

Return to FieldGenius

Who is online

Users browsing this forum: No registered users and 1 guest