Problems - import ascii points

Discussion of MicroSurvey CAD related issues and questions.

Moderators: Brian Sloman, Jason Poitras, James Johnston

Problems - import ascii points

Postby ycamus » Fri Jun 22, 2007 1:20 pm

Hi,

A client sent me his files. I can import his text file with Ptnumber, Easting, Northing and Elevation ok. The points get stored in the .msd database and points show ok on the drawing.

He does exactly the same thing with the same files and points are not stored in the .msd and do not appear right on the drawing (blue points but no white crosses - no elevation, pntnumber, description). It has worked ok in the past...

Does anyone have a clue?

Thanks!
ycamus
 
Posts: 2
Joined: Tue Nov 08, 2005 11:16 am

Problems - import ascii points

Postby John Gallagher » Fri Jun 22, 2007 4:18 pm

Hi,
Have him go into MStools-->Microsurvey System Toggles.Make sure the auto add database box is checked in the general settings.Then go to the cad drawing controls tab and make sure the boxes for draw point numbers,descriptions,elevations and nodes are checked.
Also,in the import points dialoge,have him check that he has the proper settings (e.g. comma delimited,pt.number,north,east etc.) set to match the file he is trying to import.
Hpe this helps.
John Gallagher
John Gallagher
 
Posts: 62
Joined: Fri Nov 08, 2002 1:35 pm
Location: Long Island New York

Postby ycamus » Thu Jun 28, 2007 12:12 pm

OK! Finally it was fixed by activating the toggle "Store coordinates in COGO database" when choosing the format of the ascii file...

Thanks!
ycamus
 
Posts: 2
Joined: Tue Nov 08, 2005 11:16 am


Return to MicroSurvey CAD

Who is online

Users browsing this forum: Bing [Bot] and 2 guests

cron