Discussion of FieldGenius related issues and questions.
Moderators: Brian Sloman, Jason Poitras, James Johnston
-
jollyroger
- Posts: 3
- Joined: Mon Feb 26, 2007 6:49 pm
Post
by jollyroger » Tue Aug 21, 2007 4:54 am
I have had a problem connecting the extreme tracker to the PC via serial port com1. The network setting seems to be right but Active sync 4.5 is not recognising the tracker. can you help on the setup parameters?
thanks
roger
-
mlbrack
- Posts: 49
- Joined: Wed Jul 06, 2005 1:36 pm
Post
by mlbrack » Wed Aug 22, 2007 12:54 pm
Why are you connecting via serial? If you have an extreme, connect to com 1 via usb. That will probably give you an easier connection and is vastly faster.