Raster

Discussion of MicroSurvey CAD related issues and questions.

Moderators: Brian Sloman, Jason Poitras, James Johnston

Raster

Postby surveyor6925 » Sun Sep 28, 2008 2:31 pm

I have one drawing that will not print a tiff picture. All previous drawigs and all drawings since have no problem. The picture appears in the preview, looks good etc. but the actual print does not have the picture. Model space or paper space, pdf file or plotter, makes no difference.
Is there a toggle somewhere that I'm missing?
Tim Riley
surveyor6925
 
Posts: 52
Joined: Wed Sep 22, 2004 4:03 am
Location: Norwalk, Ohio

Postby fjt_aus » Mon Sep 29, 2008 2:10 am

Check which layer you have the tif on (I usually have a layer for images). Go to EXPLORE LAYERS and go across to the column with the heading PRINT. Make sure there is a YES for you particular layer. If there is a NO then it won't print.
fjt_aus
 
Posts: 32
Joined: Fri Oct 27, 2006 8:24 pm
Location: South Australia

Postby surveyor6925 » Thu Oct 02, 2008 12:46 pm

Not the problem. I checked into it a little more. Seems like its a format problem. Everything smaller than a D size sheet will print. Even a D size reduced down to a smaller format will print. Thought this one was worked out. Apparrently it is not fully worked out.
Tim Riley
surveyor6925
 
Posts: 52
Joined: Wed Sep 22, 2004 4:03 am
Location: Norwalk, Ohio

Postby getrsurveyed » Mon Nov 03, 2008 12:46 pm

just found this myself.... never tried plotting rasters to my HP-110
but when trying to plot a 24*36 with raster background .. it only
prints some of them .. not all ??
getrsurveyed
 
Posts: 49
Joined: Fri Nov 04, 2005 1:59 pm
Location: Cambridge Oh

Postby surveyor6925 » Sat Nov 08, 2008 7:14 am

I have one now same problem. 24 x 36 format, three viewports. The viewport on either end will print the raster. The middle viewport, whcih is what I would rather have, does not print. Size of the raster is 156M tiff. I can print to a 11x17, at a greatly reduced scale just fine. It's the larger formats that are the issue
Tim Riley
surveyor6925
 
Posts: 52
Joined: Wed Sep 22, 2004 4:03 am
Location: Norwalk, Ohio


Return to MicroSurvey CAD

Who is online

Users browsing this forum: No registered users and 1 guest