MicroSurvey is pleased to announce Service Pack 1.1 for MicroSurvey CAD 2013. This latest version of MicroSurvey CAD – built for surveyors, contractors and engineers – introduces support for the Leica Nova MS50 Multistation, and is available in 5 product levels: Basic, Standard, Premium, Ultimate, and Studio.

According to Brian Sloman, Desktop Products Manager at MicroSurvey, "The Leica Nova MS50 Multistation is an incredibe example of Leica innovation and engineering, and we are extremely proud to be the only complete CAD system to support the Nova.  Along with importing points, figures, and raw survey data, MicroSurvey CAD can also display any photographic images that were recorded, and Nova's high-definition scans can be viewed with MicroSurvey CAD Ultimate or Studio, allowing users to draw and measure directly inside the scan, generate surface models from the scan, and much more!"

MicroSurvey offers free trial versions for all of its major software – download MicroSurvey CAD 2013 SP1.1 today!

Release Notes

Complete MicroSurvey CAD 2013 Release Notes: click here

New Features in MicroSurvey CAD 2013 SP1.1

Leica Nova MS50 Multistation Support (Leica DBX Import)

MicroSurvey CAD now supports importing Leica DBX projects surveyed with the new Leica Nova MS50 Multistation, including its images and 3D scans.

Images can be imported and displayed in MicroSurvey CAD Basic, Standard, Premium, Ultimate or Studio editions.

Scans can be imported and displayed in MicroSurvey CAD Ultimate or Studio editions.

To import a Leica DBX database: select MsTraverse | Read Collector Files In | Leica DBX | Read DBX Database from the menus, or type DBXIN at the command line.

To manage all imported databases: select MsTraverse | Read Collector Files In | Leica DBX | Manage Imported Databases from the menus, or type DBXMANAGE at the command line.

To view images taken from a specific station: press the Image buttons in the Active Coordinate Editor or the Single Point Editor.

To view all imported images: select MsTraverse | Read Collector Files In | Leica DBX | View Imported Images from the menus, or type DBXIMAGES at the command line.

To view all imported scans: select MsTraverse | Read Collector Files In | Leica DBX | View Imported Scans from the menus, or type DBXSCANS at the command line.

Important Fixes in MicroSurvey CAD 2013 SP1.1

• [D6121] AutoMap Library - An AutoMap Library located outside of the default folder could not be automatically opened, so the mscad.csv library would load instead.
• [D6054] Check For Updates - The online updater command did not check to confirm that your USB license key has already been activated for the update available for download.
• [D6203] Import FieldGenius - The SyncWizard Import command did start in the correct default folder.
• [D6066] Import Leica DBX - If multiple DBX databases are imported into a drawing, only images referenced in last imported database were accessible. All images and scans imported from multiple Leica DBX databases and MicroSurvey FieldGenius projects are now accessible.
• [D6157] Import Leica DBX - Figures are now imported as 3D by default instead of 2D.
• [D6168] Import Leica DBX - A new option was added to process linework using either the figure code (as previous) or the point code from the first point on the figure.
• [D6045] Render - A performance issue when rendering Text entities is resolved via a new "Render Text" view option which prevents rendering of all text entities for improved performance.
• [D6095] Render - The Rendering commands were missing from the View menu, they are now accessible via View | Rendering | Render, etc.
• [D6083] Status Bar - The Graphics Mode indicator (OpenGL or BMP) was missing from the status bar at the bottom of the main interface.
• [D6129] Surface Modeling - In the Surface Color Options dialog, selecting Surface Color Method = None does not work.
• [D6123] Surface Modeling - In the Surface Color Options dialog, when "Drawing Legend" is enabled it may not drawn onto the same layer as the surface.
• [D6045] Point Cloud Linework - A performance issue when rendering Text entities is resolved via a new "Render Text" view option which suppresses the rendering of all text entities for improved performance.
• [D6122] Point Cloud Linework - When drawing in the point cloud viewer, the CAD display did not immediately update until the mouse was moved over the drawing area.
• [F2227] Point Cloud Linework - When drawing in the point cloud viewer, the AutoMap Library did not control how linework is drawn (including: layer, linetype, 2D/3D, Lines/Polylines).

Download MicroSurvey CAD 2013 SP1.1

Download MicroSurvey CAD 2013 SP1.1 Full Install: click here

MicroSurvey CAD can be run in a 30-day, fully functional trial period for demonstration purposes.

Existing MicroSurvey CAD users with a current (non-expired) maintenance subscription support plan must use the USB License Manager application to update their USB License Key(s) to continue running this version beyond the 30-day trial period. If your maintenance plan has expired, please call MicroSurvey Software Inc. at 1-800-668-3312 or 1-250-707-0000 or contact your local MicroSurvey dealer to renew it.

Download Additional Supporting Applications

MicroSurvey Transfer (free add-on for FieldGenius users, requires Microsoft ActiveSync or Windows Mobile Device Center): click here

MicroSurvey USB License Manager (included in the MicroSurvey CAD install): click here

MicroSurvey USB Network License Server (must be purchased separately, required a password to install): click here

MicroSurvey PCI Conversion Utility for FARO 5.1 (free conversion utility for FARO users): click here

View Additional Online Resources

MicroSurvey CAD Product Website: click here

MicroSurvey CAD Online Training Movies: click here

MicroSurvey CAD 2013 Upgrade Tour Movies: click here

MicroSurvey CAD 2013 Release Notes: click here

MicroSurvey CAD 2013 Upgrade Notes: click here

MicroSurvey CAD 2013 Known Issues: click here

MicroSurvey CAD 2013 Frequently Asked Questions: click here

Layout Version 1.0.5.11

MicroSurvey Layout is a simple to use locating program designed specifically for construction layout and MEP contractors. Used on its own, or in conjunction with Point Prep, MicroSurvey Layout gives you all the tools you need to layout your points accurately and easily. Also included is an as-built mode to document work that has been completed, or to measure and record points needed for earthwork quantities.

Available Platforms

MicroSurvey Layout is available for the following devices:

• All Windows Mobile 6 Devices including:
• Juniper Systems Allegro MX
• Juniper Systems Archer
• Juniper Systems Mesa
• Nautiz X7
• Leica iCON CC50
• Leica TS15, CS10 and CS15.

MicroSurvey Layout can also be installed on your desktop computer including all tablet computers running Windows operating systems. The following devices are supported:

• Desktop computers running Windows XP, Vista, Windows 7 and Windows 8.
• Laptop computers running Windows XP, Vista, Windows 7 and Windows 8.
• Tablet computers running Windows 7
• Leica iCON CC60/61
• Algiz 7

Special Features and Fixes

NOTE:  This version fixes a stationing display bug in the Aignment Layout dialog.

• Support for the Leica 3D Disto.
• Long Range Bluetooth support for the GeoMax Zoom80 robotic total station.
• Support for the GeoMax Zoom 35 total station.
• Tweaked an OWI setting that caused a disconnect between the instrument and data collector.

More Information and Demo

For more information about this product, please visit the MicroSurvey Layout website.

To download a demo, please fill out the following demo request form or contact your dealer.

MicroSurvey is pleased to announce a major service pack update for MicroSurvey CAD 2013. This latest version of MicroSurvey CAD – built for surveyors, contractors and engineers – is powered by the latest IntelliCAD 7.2a engine, and is available in 5 product levels: Basic, Standard, Premium, Ultimate, and Studio

The new IntelliCAD 7.2a engine has over 700+ fixes since the release of IntelliCAD 7.2 which was used in MicroSurvey CAD 2013, and has new support for opening AutoCAD 2013 .dwg/.dxf files.

According to Brian Sloman, product manager for desktop products at MicroSurvey, "The over 700+ fixes included in the IntelliCAD 7.2a engine provide our users with a dramatically improved overall experience, and being able to open AutoCAD 2013 and AutoCAD 2014 drawing files maximizes their ability to work with drawings from third-party sources. On top of the improvements to the CAD engine, several important new surveying-related features have also been added which we know our users are going to love: full 3D rendering in MicroSurvey CAD Standard, Premium, Ultimate, and Studio; view point cloud data from LiDAR and 3D scanners and draw or create surface models directly within that point cloud data in MicroSurvey CAD Ultimate and Studio; design and record keyframe animations in MicroSurvey CAD Studio; an enhanced Autosave that now backs up the survey database; and many other enhancements that have been added."

MicroSurvey offers free trial versions for all of its major software – download MicroSurvey CAD 2013 SP1 today!

Release Notes

Complete MicroSurvey CAD 2013 Release Notes: click here

New Features in MicroSurvey CAD 2013 SP1

Powered by IntelliCAD 7.2a

MicroSurvey CAD 2013 is built on the latest IntelliCAD engine, IntelliCAD 7.2a. See below for a summary of what's new.

MicroSurvey CAD Ultimate & Studio editions

Development work on integrating the Hoops3D graphics engine and the Leica pcE point cloud engine with IntelliCAD 7 is complete.

MicroSurvey CAD 2013 Ultimate is now available, with the same powerful point cloud capabilities as MicroSurvey CAD 2010 Ultimate.

MicroSurvey CAD 2013 Studio is a new edition that adds powerful 2D/3D keyframe animation capabilities on top of the MicroSurvey CAD Ultimate feature set. Animate symbols and camera views through your drawing and/or point cloud, and produce the animation as an .avi video.

The Hoops3D graphics engine has been updated to v19.26 for maximum performance and stability.

This re-introduces all 3d rendering capabilities previously available in MicroSurvey CAD 2010, including: RENDER, INSERTCAM, EDITCAM, FIXCAMERAS (available in Standard, Premium, Ultimate, and Studio versions).

This re-introduces all point cloud capabilities previously available in MicroSurvey CAD 2010, including: PCLW, and the PCI Conversion Utility (available in Ultimate and Studio versions).

This re-introduces all animation capabilities previously available in PointCloud CAD 2010, including: ANIM, ANIMRENDER (available in Studio version).

AutoCAD® 2013 .dwg/.dxf File Support

MicroSurvey CAD 2013 can now automatically convert and open AutoCAD R2013 .dwg/.dxf files, then Save them as R12-R2010 .dwg/.dxf format.

Or, use the standalone IntelliConvert conversion utility to manually convert R12-R2013 .dwg/.dxf files.

Improved Job Defaults dialog

The General Configuration Options dialog that appears when opening a new or existing drawing has been improved with options to select the drawing's AutoMAP Library file, Feature List File (for GIS data), and Coordinate System.

The obsolete MicroSurvey 10/11/12 database field has been removed from this dialog and moved to a new command (MsPoints | Other Program Ties | MicroSurvey 10/11/12 | Set MS10/11/12 Database).

Copy Between Drawings

The Copy Between Drawings command (previously available in MicroSurvey CAD 2010) has been rewritten to work with IntelliCAD 7.

Select Modify | Copy Between Drawings from the menus, or type MSCOPY at the command line.

Align Between Drawings

A new Align Between Drawings command is now available for copying and aligning entities between two open drawings.

Select Modify | Align Between Drawings from the menus, or type MSALIGN at the command line.

Export Leica iCON

A new Export Leica iCON command is available to export points and linework for use in a Leica iCON project.

Select MsTraverse | Write Collector Files Out | Leica iCON from the menus, or type EXPORT_ICON at the command line.

Auto-Add Points to Blocks & Text

The Auto-Add Points to Objects command now supports Blocks, and will store a point at the Insertion Point of any selected Block entities.

The Auto-Add Points to Objects command now supports Text, and will store a point at the Insertion Point of any selected Text entities.

Select MsPoints | Auto-Add Points to Objects from the menus, or type AUTOP at the command line.

FieldGenius SyncWizard Default Folder

The default FieldGenius SyncWizard Import/Export folders have been moved to make them more easily accessible.

Old location, Windows XP and earlier: C:\Documents and Settings\All Users\Application Data\MicroSurvey\MSCAD\2013\SyncWizard\Downloads, Uploads

Old location, Windows Vista and newer: C:\ProgramData\MicroSurvey\MSCAD\2013\SyncWizard\Downloads (or Uploads)

New location: My Documents\MicroSurvey\SyncWizard\Uploads, Downloads

Note, the SyncWizard Import/Export commands will default to the new location only if the old location is empty. If any projects are found in the old location, it will still be used as the default until you remove them.

You will need to install MicroSurvey Transfer v12.7.9.0 or newer for it to automatically use the new default folders.

Rescale Drawing Wizard

Easily rescale drawings from one base unit to another.

It is typical for architectural drawings to be in either inches or millimeters, and these drawings need to be rescaled to feet or meters.

Select MsTools | Rescale Drawing Wizard from the menus, or type DWG_RESCALE at the command line.

AutoSave with Survey Database

The IntelliCAD AutoSave feature now also saves a copy of the current database.

The AutoSave folder is your system Temp folder by default, and can be defined in the OPTIONS command.

The AutoSave drawing file extension is .SV$ by default and can be customized in the OPTIONS command.

The AutoSave database file extension is .MZ$ and cannot be customized.

To recover an AutoSave drawing, you must rename the .SV$ and .MZ$ file extensions to .DWG and .MSZ respectively.

Select Tools | Options from the menus, or type OPTIONS at the command line.

Lot Table

Draw a table detailing the lines, arcs and points that define a lot, along with its area and perimeter.

Select MsAnnotate | Add Tables | Add Lot Table from the menus, or type LOT_TABLE at the command line.

Important Fixes in MicroSurvey CAD 2013 SP1

• [D5540] Active Coordinate Editor - A crash may occur when Rotating, Scaling, or Shifting a large number of points.
• [D5564] Active Coordinate Editor - Remove Selection from DTM can cause a crash if all points are removed from the surface.
• [D5598] Alphanumeric Points - Dashes in alphanumeric point IDs can cause the program to stop responding when iterating through the database in some situations.
• [D4206] Alphanumeric Points - Incrementing alphanumeric point IDs had some inconsistent behaviour. For example, the Next point after "a" may be either "a0" or "a1" depending on the command.
• [D0000] Areas - FASTAREA (Area by Selecting Objects) command could calculate incorrect area if the boundary contains arc segments.
• [D5910] Areas - FASTAREA (Area by Selecting Objects) command could become unstable and crash if a Spline is selected as a bounding entity.
• [D5649] Assistant - MicroSurvey Assistant dialog can disappear behind the main window.
• [D5812] AutoMap Library - A crash can occur when processing large projects (ie, more than 4000 points).
• [D5935] AutoMap Library - Switching drawings did not force the AutoMAP library to switch.
• [D5684] AutoSave - A crash can occur if an AutoSave occurs while editing Text via the Entity Properties panel.
• [D5955] AutoSave - AutoSave can occur in the middle of some commands, which can cause error messages and/or a crash.
• [D5660] Batch COGO - When processing a Batch COGO file, the program can stop responding at the "Pick the side you want the bearing placed/Above/Below" prompt.
• [D5638] Export ASCII - a crash can occur when exiting the Export ASCII command by pressing <Enter> instead of <Esc> at the Enter Point or Range prompt.
• [D5618] Export FieldGenius - The FG_MAKE_PROJ command can produce an "Error PA2T4S" while building the DXF file if it includes any curve-fitted polylines, spline-fitted polylines, splines, or hatches.
• [F1954] Export FieldGenius - Added a "Use R12 DXF Format" option to control whether DXF is written as R12 format.
• [D5956] Export FieldGenius - Exporting a FieldGenius XG2 project can cause a crash if overwriting a project that is currently open or in use.
• [D2352] Export FieldGenius - After exporting a FieldGenius 2004+ project you cannot open the generated .DXF file until the program is restarted.
• [D6011] Export FieldGenius - When exporting a FieldGenius XG2 project, the "Include Text" option is now hidden because it is not applicable.
• [D5768] Export Google Earth - Points with large IDs may not be exported to the KML/KMZ file.
• [D5629] Hot Toggles - Closing a drawing did not immediately update Hot Toggles with the settings in the new current drawing.
• [D5596] Import FieldGenius - The SYNCWIZARD command did not detect if the FieldGenius project units did not match the drawing units, this has been fixed and you are again prompted to change the drawing settings when they do not match.
• [D5746] Import FieldGenius - The SYNCWIZARD command may not interpret the version number correctly from comment records like "--FieldGenius v 6.0.0.4 (2012-03-29)"
• [D5624] Import Leica DBX - An incorrect HI value can be reported in cases where a spur point is set off of a traverse point from the main traverse line, then topo measurements are taken from that spur point, and another spur point is set for taking additional topo measurements.
• [D5792] Import TDS RAW/RW5 - The last data line in the file may be skipped if the file does not end with a blank line.
• [D5842] Independent Point Numbers - IPN labels are displayed in the wrong position after a zoom extents.
• [D5909] Independent Point Numbers - IPN labels are displayed in the wrong position when in a UCS. As a temporary partial fix, IPNs are now disabled when in a UCS until this can be fixed.
• [D5991] Independent Point Numbers - IPN labels are not immediately updated when opening/switching a drawing.
• [D5992] Independent Point Numbers - IPN labels are not immediately updated when storing new points in a drawing.
• [D4167] Independent Point Numbers - Closing a drawing did not immediately update IPNs with the points in the new current drawing.
• [D3037] Labeling Defaults - Truetype fonts located in your system Fonts folder (for example, Arial.ttf) could not be specified in the Labeling Defaults dialog.
• [D5666] Labeling Defaults - Truetype fonts located in your system Fonts folder (for example, Arial.ttf) could cause "Font not found" error messages when drawing text.
• [D5622] Layer States - The LAYERSTATE command did not work, this has been fixed.
• [D6041] Licensing - Network License was not immediately released on exiting from the program, until timing out 180 seconds later.
• [D5603] Linework - When erasing entities in a drawing that have unexpected EED, a crash could occur.
• [D5625] Linework - The PASTEORIG (Paste to Original Coordinates) command did not remove EED from the entities being copied, so further edits could inappropriately update the database.
• [D5718] Linework - Trimming a survey line removes the line from the database and erases its Bearing/Distance labels.
• [D5766] Linework - Deleting a layer via EXPLAYERS (Layers Explorer) that has points on it does not delete the points from the database.
• [D5494] Linework - Erasing a DIM can cause lines to be removed from the database.
• [D5997] Linework - Editing the length of a survey line via LEN command did not remove the line from the database.
• [D5998] Linework - Moving a line by dragging it did not remove the line from the database.
• [D6007] Linework - Moving a survey arc can cause the arc to be erased from the drawing if the "Draw lines/arcs" hot toggle is off.
• [D4765] Log File - Writing to the .rtf log file can cause a crash and persistent "Error opening log file?" messages.
• [D5690] Pad Builder - The BUILD_PAD command can produce odd warning messages about having an invalid number of decimal places while you are inputting an angle.
• [D5701] Pad Builder - The BUILD_PAD command can produce a crash if the "Reset start point and direction" button is pressed.
• [D5715] Quick Posts - a crash can occur when exiting the Quick Posts command by pressing <Enter> instead of <Esc> at the Select Point prompt.
• [T1537] Regen Notifications - REGENTOOLTIP system variable is now set to Off by default. This causes the program to automatically regenerate your drawing instead of displaying the popup notification that a regen is required.
• [D5657] Roading - When editing the Vertical Curve Length in a Vertical Alignment, the curve is redrawn properly but its extended entity data is not updated, so the previous Curve Length value may continue to be used.
• [D2048] Save - SAVEAS did not immediately create the new filename’s .msj database folder until a database-accessing command would run.
• [D5929] Save - SAVEAS to a new filename also saves the original filename’s .msz database file, which may cause the drawing and database to get out of sync.
• [D3425] Save - SAVE to a new filename also saves the original filename’s .msz database file, which may cause the drawing and database to get out of sync.
• [D5980] Save - SAVEALL saves all open drawings with the current drawing’s .msz database file. As a preventative measure we have temporarily removed the SAVEALL command until this can be fixed.
• [D5694] Scale Factors - Scaling an input distance at the command line with the "s" suffix (like 100s) may result in a "Not a valid distance" error message.
• [D5960] Scale Factors - Scaling an input distance at the command line with feet/inches entry (like 10'6") does not work, result is in inches instead of feet.
• [D5863] Scale Factors - Existing Point Traverse (Old) command can write garbled "Direction of error" result if an Output Scale Factor is used.
• [D5901] Scale Viewport - The SCALE_VPORT (Scale Layout Viewport) command did not work with non-rectangular viewports. It now also supports polygonal, circular, elliptical, and splined viewports.
• [D5606] Snapping - Enabling Polar Snapping or Entity Snap Tracking modes may not work reliably because the AUTOSNAP system variable would not accept any value greater than 39.
• [D5653] Surface Modeling - The SVOL (Surface Volume) command's Volumes and Average Values report may generate incorrect Plan Area and Average Thickness values.
• [D5722] Surface Modeling - The CELEV (Change Elevation) command can produce an error message "Select is not an available tear-off menu name" immediately upon starting the command.
• [D5740] Surface Modeling - The SPLAN (Surface Plan View) command generates an error "Unable to recognize command ._PLANVIEW"

Important Fixes in IntelliCAD 7.2a

The following list details some of the new 700+ fixes that were implemented since the initial 7.2 release.

Performance enhancements

Improved performance for drawings with underlays, including snap, pan, zoom, and entity creation.

Improved regeneration when working with linetypes.

Printing

Several fixes for print preview.

Fixed some cases where the print area was cropped improperly.

Improved pen widths.

Fixed printing of OLE objects.

Dimensions

Fixed lineweight of diameter and radius dimensions.

Fixed editing of dimension text when using STRETCH.

Snapping and tracking

Fixed issue with intersection snapping when drawing entities.

Guidelines improved for polar and entity tracking and all entity snaps are turned on.

Fixed entity snaps when using STRETCH.

Fixed snapping to grip points during grip editing.

Fixed nearest snap after changing the viewpoint.

Fixed entity snaps when using Polyface Mesh command.

Blocks

Fixed cases where text inside blocks was not positioned properly.

Multiple fixes for exploding blocks.

Fixed insertion point of blocks with dimensions.

Fixed regenerating raster images in blocks.

Text

Multiple fixes for SPELL.

Fixed text height issue when working with annotative text.

MTEXT dialog oblique display improved.

Hatches

Fixed -HATCH with HPNAME set to a new pattern.

Improved handling of hatch display when pattern is to dense to display.

Fixed issue with custom hatch patterns.

Fixed issue when moving associative hatches.

Raster images

Fixed issue with negative viewing and printing of some raster images.

Image selection fixed when working with grids.

Transparent ZOOM fixed when working with the IMAGECLIP command.

Fixed the ATTACH command for raster images.

Image printing fixed when fading is set to 0.

Fixed use of positioning files for images.

Fixed "keep aspect ratio" option for raster images.

Clipping fixed for images with rotated UCS.

More fixes

Issues fixed for opening drawings with AEC objects.

Fixed loading of linetypes from icad.lin in reported cases.

Several fixes when using grips, including entity display, z-coordinate issues, and image frame display.

Cross polygon selection fixed for reported zoom levels.

Fixed DIVIDE when working with blocks.

Fixed OFFSET for ellipses.

Fixed selection of hidden shapes.

Fixed issues with CHSPACE command.

Fixed TRIM command when working with infinite lines.

Multiple fixes for rotation.

Multiple display fixes, including for ACIS objects, viewing multiple viewports, ZOOM+E, HIDE command, and grips.

Fixed issues with DVIEW command.

Fixed WP selection for non-world view.

Fixed cursor position during tablet use.

Fixed z-coordinate issue for Box command options.

Export to PDF improved.

Options > Paths/Files tab improved.

New system variables

AECOBJECTS, AUTOCOMPLETEMODE, DEFSAVEASTYPEINDEX, ETRACKDELAY, EXPXREFVISIBILITY, FINDTEXTINT, GRIDDISPLAY, GRIDMAJOR, GRIDSTYLE, GRIPBYKEYBOARD, LTYPEGEN, MTEXTOBLIQUECOLOR, MTEXTSTACKEDCOLOR, PRINTAUTOROTATE, WNDSHOWPROP.

Download MicroSurvey CAD 2013 SP1

Download MicroSurvey CAD 2013 SP1 Full Install: click here

MicroSurvey CAD 2013 SP1 can be run in a 30-day, fully functional trial period for demonstration purposes.

Existing MicroSurvey CAD users with a current (non-expired) maintenance subscription support plan must use the USB License Manager application to update their USB License Key(s) to continue running this version beyond the 30-day trial period. If your maintenance plan has expired, please call MicroSurvey Software Inc. at 1-800-668-3312 or 1-250-707-0000 or contact your local MicroSurvey dealer to renew it.

Download Additional Supporting Applications

MicroSurvey Transfer (free add-on for FieldGenius users, requires Microsoft ActiveSync or Windows Mobile Device Center): click here

MicroSurvey USB License Manager (included in the MicroSurvey CAD install): click here

MicroSurvey USB Network License Server (must be purchased separately, required a password to install): click here

MicroSurvey PCI Conversion Utility for FARO 5.1 (free conversion utility for FARO users): click here

View Additional Online Resources

MicroSurvey CAD Product Website: click here

MicroSurvey CAD Online Training Movies: click here

MicroSurvey CAD 2013 Upgrade Tour Movies: click here

MicroSurvey CAD 2013 Release Notes: click here

MicroSurvey CAD 2013 Upgrade Notes: click here

MicroSurvey CAD 2013 Known Issues: click here

MicroSurvey CAD 2013 Frequently Asked Questions: click here

MicroSurvey FieldGenius Version 6.0.5.9

MicroSurvey Software Inc. is proud to announce the release of this latest version of FieldGenuis 2012.

New Features for FieldGenius 2012 Version 6.0.5.9:

•    Many new features including:

  • Shape file importer.
  • Bearing Recall, Math Operators, and quadrant codes returned (user forum request)
  • GeoMax Z25 GNSS driver support added
  • GeoMax Zoom80 Long Range Bluetooth support added
  • GeoMax Zoom35 total station support added
  • and much more.

•    New Coordinate Systems and Geoid Models:

  • Hungary Coordinate Systems approved by FOMI,
  • Fixed Japan Grid Shift file,
  • Added Wisconsin WISCRS2006 coordinate systems,
  • Added 21 new coordinate systems to assist working in CSRS,
  • We also added subsets of EGM08 specifically cut out for Chile, Lebanon, Uganda, Kenya, Afghanistan, Pakistan, Indonesia, and Myanmar.  These are all available to download for free at our web site.

•     Many bug fixes:

  • Fixed a bug preventing Voice Notes from being played on Windows 7 machine.
  • Fixed a bug with the GeoMax Z10/20 and connecting to an external radio at a 19200 baud rate.
  • Fixed an issue with the FOIF OTS812L total station where no live angular information was displayed in the Observation tool bar.
  • and many more (see release notes for details).

Upgrade Cost?

This is a free upgrade to customers who already have a licensed version of FieldGenius 2012 Version 6.0.0 or higher.

Please review the Release Notes for more details on this new version.

MicroSurvey FieldGenius 2012 Version 6.0.5 Install Web Page

MicroSurvey FieldGenius 2012 Product Website:

MicroSurvey Software Inc. is pleased to announce STAR*NET 7.2.2, the latest service pack update to its industry-leading STAR*NET least squares network adjustment suite.  This update includes a new 10-day, fully-functional STAR*NET-PRO demo period and a new STAR*Leica DBX conversion utility for importing Leica data, as well as fixes to several important issues when importing MicroSurvey FieldGenius, Leica DBX, Trimble JobXML, and Trimble TSC data files.  This is a FREE update for any STAR*NET users who already use STAR*NET 7.2, or to any STAR*NET users who have a valid (non-expired) Maintenance Subscription Support Program. 

New Features in STAR*NET 7.2.2:

Fully Functional Demo

A fully-functional 10-day demo period has been added, during which you can run the fully-featured STAR*NET-PRO edition plus all of the STAR*NET data conversion utilities.

After 10 days, you can continue to run the feature-limited STAR*NET-DEMO edition, which has all the capabilities of STAR*NET-PRO but is limited to an adjustment of 10 stations, 100 observations, and 15 GPS vectors.

Leica DBX Conversion Utility

A new standalone Leica DBX conversion utility (licensed separately) is now available for importing both conventional and/or GPS data from Leica DBX databases.

Several fixes have been implemented since STAR*LeicaDBX v7.2.0.12 which was previously available as a zip download from our website, see details below.

Defects Fixed in STAR*NET 7.2.2:

• [D5582] Adjustment - A crash could occur while adjusting a network during Cholesky Factorization, this has been fixed.
• [D5845] General - When setting/changing an output filename in the GPS Importer, Point Reformatter, DXF Exporter, or the Conversion Utilities, the default filename may be scrolled to the side making it only partially visible.
• [D5836] GPS Importer - FieldGenius baseline importer can now read the Reference ID and position data which was recently added to the raw raw file as "--GNSS Statistics RT: ..." comment records, and it will parse these if the raw file does not contain a BP record to define the base point prior to the rover measurements (ie, when using an NTRIP or GPRS connection, connecting to a permanent base, etc).
• [D5788] Listing - The Listing Index Tree may not jump to the correct line if the "Copy of Input Data File(s)" project listing option is enabled and the input data file(s) are Unicode.
• [D5795] Listing - The "95%" column header in "Adjusted Elevations and Error Propagation" section in the listing file may not appear.
• [D5780] Network License - When using a network USB license, on exiting from the conversion utilities the license was not immediately released.
• [D5036] STAR*FieldGenius - Angles-only Multiset records cause "ERROR: Slope Distance (SD) field missing", this is now accepted as valid input data and the distance is exported as "?".
• [D5420] STAR*FieldGenius - Multiset records may cause "ERROR: Rod Height (HR) field does not match value in previous LineOfSight (LS) record" when using the "Output as 2D Data" option, this has been corrected.
• [D5420] STAR*FieldGenius - Multiset records with varying target heights cause "ERROR: Rod Height (HR) field does not match value in previous LineOfSight (LS) record", this has been changed from an Error to a Warning.
• [D5547] STAR*FieldGenius - Projects in Bearings cause "ERROR: Invalid Field Value (AD)", this is now accepted as valid input data.
• [D5843] STAR*FieldGenius - When using the "Output as 2D Data" option, the 2D coordinate C records occur after a .3D inline command.
• [D5749] STAR*JobXML - Prism Offset values were not applied to EDM distance measurements.
• [D5790] STAR*JobXML - Atmospheric Correction values were not applied to EDM distance measurements.
• [D5584] STAR*JobXML - Distances are always stored internally in the JobXML file as Meters, but they are now automatically scaled and output as Meters/FeetInt/FeetUS depending on project settings.
• [D5583] STAR*JobXML - Conventional stakeout records are not exported. All terrestrial observations with valid Circle or MTA elements are now accepted.
• [D5486] STAR*JobXML - Line Staking records are not eported. All terrestrial observations with valid Circle or MTA elements are now accepted.
• [D5487] STAR*JobXML - Some GPS vectors (with Method=GpsRTKControlPoint and Classification=Normal) are not exported to the data file. All vectors with valid ECEFDeltas elements are now accepted.
• [D5543] STAR*JobXML - Some GPS vectors (with Method=GpsRTKQuickMark) are not exported to the data file. All vectors with valid ECEFDeltas elements are now accepted.
• [D5544] STAR*JobXML - Negative PPM values cause "ERROR: PPM element has invalid value", this is now accepted as valid input data.
• [D5806] STAR*JobXML - Dialog options are not be saved when the utility is closed via the X button in the top-right corner.
• [D5585] STAR*LeicaDBX - Points without a defined elevation were exported without a z-coordinate value, causing "ERROR: Unrecognized Input" during adjustment. 2D points are now exported with a "?" z-coordinate value.
• [D5831] STAR*LeicaDBX - Averaged GPS measurements were being converted to a fixed coordinate (C record) and commented vectors (G0/G1/G2/G3 records). This has been reversed such that the vectors are no longer commented, but the coordinate is. Additionally, a comment has been added to the end of the C records to indicate their Class, which is useful when reviewing data that contains multiple observations of a point plus its averaged coordinate.
• [D5832] STAR*LeicaDBX - GPS antenna height measurements were being output to the G1 records in the selected unit. Like all values in the G1 record, they are now always output in meters.
• [D5835] STAR*LeicaDBX - GPS vector covariances were not computed correctly, results now match the same data imported as Leica SKI ASCII format.
• [D5837] STAR*LeicaDBX - Browse button doesn't start in the expected folder, it now starts in the same location as the current database folder.
• [D5844] STAR*LeicaDBX - If a required Geoid (*.gem) and/or CSCS (*.csc) file is not found when importing a database, the selected Output data file becomes locked until the utility is restarted.
• [D5548] STAR*TSC - Pressing the "Convert" button can cause an "Unable to Open Log File, Conversion not performed!" message.
• [D5567] STAR*TSC - Pressing the "View Log" button can cause the program to stop responding.

Download Link

MicroSurvey STAR*NET 7.2.2 Install (includes all conversion utilities): click here

Existing MicroSurvey STAR*NET users with a current maintenance plan may need to use the USB License Manager application to update their USB License Key(s) before this version can be run. If your maintenance plan has expired, please call MicroSurvey Software Inc. at 1-800-668-3312 or 1-250-707-0000 or contact your local MicroSurvey dealer to renew it.

For demonstration purposes, MicroSurvey STAR*NET can be run for 10-days as the fully-featured STAR*NET-PRO edition, and beyond that as the limited 10-station STAR*NET-DEMO edition.  All of the conversion utilities are also unlocked during this 10-day demo period.

Additional Online Resources

MicroSurvey STAR*NET Product Website: click here

MicroSurvey STAR*NET Online Training Movies: click here

MicroSurvey STAR*NET 7 Release Notes: click here

MicroSurvey STAR*NET 7 Upgrade Notes: click here

MicroSurvey STAR*NET 7 Known Issues: click here

Additional Supporting Applications

MicroSurvey USB License Manager (included in the STAR*NET 7 install): click here

MicroSurvey USB Network License Server (must be purchased separately): click here