This guide describes how to create a GPS GSM network profile using a GNSS Kolida K9T receiver, a Getac PS236 data collector, and MicroSurvey FieldGenius 2012.

In this guide you will learn how to connect the Kolida K9T, via Bluetooth, to the Getac PS236.

You will then learn how connect to a GPS network data correction service (such as NTRIP), and begin measuring using this GPS network data stream.

Click here to download this guide.

Note:  if you right-click on the above link and select either "Save Link As" or "Save Target as", you will be able to save this guide to your computer's hard drive.