Live Chat Software by Kayako |
Knowledgebase
|
Creating a GeoMax Zenith 10 or Zenith 20 GNSS GSM Network Rover Profile and Connecting to a GPS Network Data Correction Service Using MicroSurvey FieldGenius
Posted by John Coldrick on 21 June 2012 04:01 PM
|
|
|
This guide describes how to create a GPS GSM network profile using a GeoMax GNSS Zenith 10 or Zenith 20 receiver, a Getac PS236 data collector, and MicroSurvey FieldGenius 2012. In this guide you will learn how to connect the Zenith 10 or Zenith 20, via Bluetooth, to the Getac PS236. You will then learn how connect to a GPS network data correction service (such as NTRIP), and begin measuring using this GPS network data stream. Click here to download this guide. Note: if you right-click on the above link and select either "Save Link As" or "Save Target as", you will be able to save this guide to your computer's hard drive. | |
 (0 vote(s)) This article was helpful This article was not helpful |
|
Comments (0)