 | Data Collector | Handheld | Handheld | Algiz Tablet (Windows 7) | Supported | Use the Tablet Edition installation file and install as if it were a desktop PC |
 | Data Collector | Handheld | Juniper Systems | Allegro CE (Windows CE 3) | Retired | Install to: C_Drive |
 | Data Collector | Handheld | Juniper Systems | Allegro CE.NET (Windows CE.NET 4) | Retired | Install to: C_Drive |
 | Data Collector | Handheld | Juniper Systems | Allegro CX Colour (Windows CE.NET 4) | Supported | Install to: C_Drive |
 | Data Collector | Handheld | Juniper Systems | Allegro CX Monochrome (Windows CE.NET 4) | Retired | Install to: C_Drive |
 | Data Collector | Handheld | Juniper Systems | Allegro MX with Radio Add-on (Windows Mobile 6) | Supported | Install to: Device, Use Com 3 to connect with radio Geomax Zoom 80 Robotic Connection Guide for Allegro MX |
 | Data Collector | Handheld | Juniper Systems | Allegro MX (Windows Mobile 6) | Supported | Install to: Device |
 | Data Collector | Handheld | Juniper Systems | Archer (Windows Mobile 5) | Supported | Install to: Device |
 | Data Collector | Handheld | Juniper Systems | Archer (Windows Mobile 6) | Supported | Install to: Device |
 | Data Collector | Handheld | Leica | CS12 | Not Supported | |
 | Data Collector | Handheld | Leica | CS25 (Windows 7) | Supported | Use the Tablet Edition installation file and install as if it were a desktop PC. |
 | Data Collector | Handheld | Carlson | Explorer 600 (Windows CE.NET 5) | Supported | Install to: SystemCF |
 | Data Collector | Handheld | Carlson | Explorer (Windows CE.NET 4) | Supported | Install to: SystemCF |
 | Data Collector | Handheld | Topcon | FC-100 | Retired | Install to: CF Card |
 | Data Collector | Handheld | Topcon | FC-1000 (Windows CE 3) | Retired | Install to: Storage Card |
 | Data Collector | Handheld | Topcon | FC-120 (Windows CE) | Supported | Install to: Storage Card |
 | Data Collector | Handheld | Topcon | FC-200 (Windows CE) | Supported | Install to: Storage Card |
 | Data Collector | Handheld | Topcon | FC-2000 | Retired | Install to: Storage Card |
 | Data Collector | Handheld | Topcon | FC-2200 (Windows CE.NET 5) | Supported | Install to: SystemCF |
 | Data Collector | Handheld | Topcon | FC-25 (Windows Mobile 6.5) | Supported | Install to: Secure RAM |
 | Data Collector | Handheld | Topcon | FC-250 (Windows Mobile) | Supported | Install to: Secure RAM |
 | Data Collector | Handheld | Topcon | FC-2500 (Windows CE.NET 5) | Supported | Install to: SystemCF |
 | Data Collector | Handheld | Itronix | FS4 (Windows CE 3) | Retired | Install to: Disk |
 | Data Collector | Handheld GPS | Trimble | GeoXT (Windows Mobile 2003) | Supported | Install to: Disk |
 | Data Collector | Onboard | Topcon | GPT-9000 (Windows CE.NET 4) | Supported | Install to: Internal Disk |
 | Data Collector | Handheld | Compaq | iPAQ (PocketPC) | Supported | Install to: Storage Card |
 | Data Collector | Handheld | HP | iPAQ (Windows Mobile 2003/2003SE) | Supported | Install to: Device |
 | Data Collector | Handheld | HP | iPAQ (Windows Mobile 5/6) | Supported | Install to: Device |
 | Data Collector | Handheld | Leica | Leica CS10/CS15 (Windows CE.NET 5) | Supported | Install to: Device |
 | Data Collector | Handheld | Leica | Leica CS10/CS15 (Windows CE.NET 5) | Supported | Install to: Device |
 | Data Collector | Handheld | Juniper Systems | Mesa Tablet (Windows Mobile 6.5) | Supported | Install to: Device |
 | Data Collector | Handheld | DAP | MicroFlex CE5240 (Windows CE) | Retired | Install to: Storage_NAND |
 | Data Collector | Handheld GPS | Thales | MobileMapper CE (Windows CE.NET 4) | Supported | Install to: Storage Card Installing FieldGenius on a Magellan MobileMapper CX Data Collector |
 | Data Collector | Handheld GPS | Thales | MobileMapper CX (Windows CE.NET 5) | Supported | Install to: Storage Card |
 | Data Collector | Handheld GPS | Handheld | Nautiz X7 (Windows Mobile 6) | Supported | Install to: Device Using Onboard GPS with the Nautiz X7 Creating a Local Internet Connection on a Nautiz X7 |
 | Data Collector | Handheld | Symbol | PDT 2800 (PocketPC) | Supported | Install to: Storage Card |
 | Data Collector | Handheld | Symbol | PDT 8100 (PocketPC) | Supported | Install to: Storage Card |
 | Data Collector | Handheld | At Work Computer | Ranger (Windows CE 3) | Retired | Install to: Disk |
 | Data Collector | Handheld | TDS | Ranger (Windows CE 3) | Retired | Install to: Disk |
 | Data Collector | Handheld | TDS | Ranger (Windows CE.NET 4) | Retired | Install to: Disk |
 | Data Collector | Handheld | TDS | Ranger (Windows Mobile 2003SE) | Supported | Install to: Disk |
 | Data Collector | Handheld | TDS | Ranger (Windows Mobile 5) | Supported | Install to: Device |
 | Data Collector | Handheld | TDS | Recon (PocketPC) | Supported | Install to: Built-in Storage |
 | Data Collector | Handheld | TDS | Recon (Windows CE.NET 4) | Retired | Install to: Storage Card |
 | Data Collector | Handheld | TDS | Recon (Windows Mobile 5/6) | Supported | Install to: Device |
 | Data Collector | Onboard | FOIF | RTS810-Series (Windows CE) | Supported | Install to: |
 | Data Collector | Handheld | Leica | RX1250 | Supported | Install to Storage Card. Use Leica Devices installer and select RX 1250 option. |
 | Data Collector | Handheld | Sokkia | SHC25 (Windows Mobile 6.5) | Supported | Install to: Device |
 | Data Collector | Handheld | Sokkia | SHC250 (Windows Mobile) | Supported | Install to: Device |
 | Data Collector | Handheld | Sokkia | SHC2500 (Windows CE.NET 5) | Supported | Install to: SystemCF |
 | Data Collector | Total Station | Sokkia | SRX (Windows CE (custom)) | Supported | Install to: ROMDisk |
 | Data Collector | Handheld | Carlson | Supervisor (Windows 7) | Supported | Use the Tablet Edition installation file and install as if it were a desktop PC |
 | Data Collector | Handheld | Panasonic | Toughbook CF-P1 (PocketPC) | Retired | |
 | Data Collector | Handheld | Panasonic | Toughbook CF-P1 (Windows CE 3) | Retired | |
 | Data Collector | Handheld | MicroSurvey | Tracker Xtreme (Windows CE.NET 5) | Supported | Install to: SystemCF |
 | Data Collector | Handheld | MicroSurvey | Tracker (Windows CE.NET 4) | Supported | Install to: SystemCF |
 | Data Collector | Handheld | Trimble | TSC2 (Windows Mobile 5) | Supported | Install to: Secure RAM |
 | Data Collector | Handheld | Trimble | TSCE (Windows CE.NET 4) | Retired | Install to: Disk |
 | Data Collector | Handheld | GeoMax | ZOOM 80 C | Supported | Install to Storage Card. Use Leica Devices installer and select RX 1250 option. Zoom 80 Connection Guide |
 | GPS Receiver | NTRIP | Leica | 1200 | Supported | Extended OWI not needed with FieldGenius 6.0.1.6 or newer Leica RX1250 & GPS 1200 GPRS Leica RX1250 & GPS 1200 NTRIP |
 | GPS Receiver | NTRIP | Navcom | 3040 | Supported | Internet link is gained via a sim card or wi-fi network in the data collector, no internal GSM modem. NavCom GPS GSM Profile Creating a Local Internet Connection on a Nautiz X7 Hand Held Computer |
 | GPS Receiver | NTRIP | Navcom | 3050 | Supported | Internet link is gained via a sim card or wi-fi network in the data collector, no internal GSM modem. NavCom GPS GSM Profile Creating a Local Internet Connection on a Nautiz X7 Hand Held Computer |
 | GPS Receiver | Radio | Navcom | 3050 | Supported | NavCom Starfire Guide |
 | GPS Receiver | Radio | Trimble | 4700 | Not Supported | |
 | GPS Receiver | Radio | Trimble | 4800 | Not Supported | |
 | GPS Receiver | Radio | Trimble | 5700 | Supported (See Notes) | Trimple 5700/R7 driver. Version 4.3.4 is the last confirmed version that works. |
 | GPS Receiver | Radio | Trimble | 5800 | Supported (See Notes) | Trimple 5800/R8 driver. Version 4.3.4 is the last confirmed version that works. |
 | GPS Receiver | | Foif | A20 | Supported | Create a GPS Network Rover Profile Using FOIF FieldGenius and FOIF A20 |
 | GPS Receiver | Radio | Altus | APS-3 | Supported | Altus Base Altus Rover |
 | GPS Receiver | NTRIP | Altus | APS-3 rev2 | Supported | Altus Rover for Local Internet |
 | GPS Receiver | | Topcon | DX1 | Not Supported | |
 | GPS Receiver | NTRIP | Pentax | G3100-R1 | Supported | Create a GPS Network Rover Profile Using Pentax FieldGenius and Pentax SMT888-3G |
 | GPS Receiver | Radio | Pentax | G3100-R1 | Supported | Pentax SMT888-3G or G3100-R1 Base Setup |
 | GPS Receiver | | Topcon | GB500 | Not Supported | |
 | GPS Receiver | Radio | Trimble | GeoXT | Supported | Trimble GeoXT |
 | GPS Receiver | Radio | Topcon | GR-3 | Supported - See Notes | Version 4.3.4 is the last reported version that works with this device. |
 | GPS Receiver | Radio | Topcon | GR-5 | Supported - See Notes | Version 4.3.4 is the last reported version that works with this device. |
 | GPS Receiver | NTRIP | Sokkia | GRX-1 | Supported | Sokkia GRX1 Rover (NTRIP) |
 | GPS Receiver | Radio | Sokkia | GRX-1 Base/Rover | Supported | RTCM3 Message type works. Use Topcon FH radio type for Spread Spectrum radio. Base Setup Rover Setup |
 | GPS Receiver | NTRIP | Sokkia | GRX-1 Data Collector Internet | Supported | Use "Data Collector Internet" option to connect to the internet via your Data Collector if you do not have a GSM module in the receiver. Data Collector Internet |
 | GPS Receiver | | Leica | GS12 | Not Supported | |
 | GPS Receiver | NTRIP | Leica | GS15/GS10 | Supported | Extended OWI not needed with FieldGenius 6.0.1.6 or newer How to create an Network Profile with a Leica GS15 Receiver |
 | GPS Receiver | Radio | Leica | GS15/GS10 | Supported | Extended OWI not needed with FieldGenius 6.0.1.6 or newer |
 | GPS Receiver | | Sokkia | GSR 2200 | Not Supported | |
 | GPS Receiver | Radio | Sokkia | GSR 2600 Base/Rover | Retired | 4.3.0 is the last known version that works. GSR 2600 Setup |
 | GPS Receiver | Radio | Sokkia | GSR2700ISX Base/Rover | Retired | 4.3.2 is the last known version that works. Base Setup Rover Setup |
 | GPS Receiver | NTRIP | Sokkia | GSR2700ISX NTRIP/Network | Retired | 6.0.1.5 works with Ntrip, although there may be issues with certain message types from certain mountpoints. NTRIP Setup GPRS (Network) Setup |
 | GPS Receiver | NTRIP | Topcon | HiPer | Supported | Uses Data Collector Internet for NTRIP connection Data Collector Internet |
 | GPS Receiver | Radio | Topcon | Hiper 2 | Supported | Uses same options as Sokkia GRX, RTCM 3 message type supports Glonass. Use Topcon FH radio type for Spread Spectrum radio. Sokkia GRX1 Setup (Base) Sokkia GRX1 Setup (Rover Radio) |
 | GPS Receiver | Radio | Topcon | Hiper Ga | Supported | Topcon HiPer Ga/Gb, GR3 Setup for the Base Topcon HiPer Ga/Gb, GR3 Setup for the Rover |
 | GPS Receiver | Radio | Topcon | Hiper Gb | Supported | Topcon HiPer Ga/Gb, GR3 Setup for the Base Topcon HiPer Ga/Gb, GR3 Setup for the Rover |
 | GPS Receiver | Data Collector Internet | Horizon | K200 | Supported | |
 | GPS Receiver | NTRIP | Horizon | K200 | Supported | |
 | GPS Receiver | UHF | Horizon | K200 | Supported | |
 | GPS Receiver | NTRIP | Kollida | K9T | Supported | Same options as the South S82 South S82 GNSS Receiver |
 | GPS Receiver | Radio | Topcon | Legacy | Supported | |
 | GPS Receiver | | NovAtel | Novatel DL-4 | Supported | |
 | GPS Receiver | | NovAtel | Novatel OEM3 | Supported | |
 | GPS Receiver | | NovAtel | Novatel OEM4 | Supported | |
 | GPS Receiver | | NovAtel | Novatel OEM5 | Not Supported | |
 | GPS Receiver | | NovAtel | Novatel ProPak LB | Supported | |
 | GPS Receiver | | Topcon | Odyssey | Supported | |
 | GPS Receiver | NTRIP | Ashtech / Thales | PM 500 | Supported | Ashtech ProMark 500 NTRIP or GPS Setup Guide |
 | GPS Receiver | Radio | Ashtech / Thales | PM 500 | Supported | Ashtech ProMark 500 Base Receiver Setup Guide Ashtech ProMark 500 Rover Receiver with PDL Radios |
 | GPS Receiver | | Sokkia | Point SMART 6100 IS | Supported | Use the Sokkia Radian IS driver |
 | GPS Receiver | | Trimble | R4 | Not Supported | Recent firmware updates include encrypted data streams which third party software can not interpret. |
 | GPS Receiver | | Trimble | R6 | Not Supported | Recent firmware updates include encrypted data streams which third party software can not interpret. |
 | GPS Receiver | | Trimble | R7 | Supported (See notes) | Trimple 5700/R7 driver. Version 4.3.4 is the last confirmed version that works. |
 | GPS Receiver | | Trimble | R8 | Supported (See notes) | Use the Trimble 5800/R8 driver on the rover, Trimble 5700/R7 driver on the base. Version 4.3.4 is the last confirmed version that works. |
 | GPS Receiver | NTRIP | Ruide | R90 | Supported | |
 | GPS Receiver | | Sokkia | Radian | Retired | 4.3.0 is the last known version that works, we expect support will be added again in the future. Configuring Radian Port |
 | GPS Receiver | | Sokkia | Radian IS | Supported (See notes) | 4.3.0 is the last known version that works. Configuring Radian Port |
 | GPS Receiver | | Allen Osborne | Rascal | Not Supported | |
 | GPS Receiver | NTRIP | South | S82 | Supported | South S82 GNSS Receiver |
 | GPS Receiver | NTRIP | South | S86V | Supported | Same options as the South S82 South S82 GNSS Receiver |
 | GPS Receiver | NTRIP | Pentax | SMT888-3G | Supported | Create a GPS Network Rover Profile Using Pentax FieldGenius and Pentax SMT888-3G |
 | GPS Receiver | Radio | Pentax | SMT888-3G | Supported | Pentax SMT888-3G or G3100-R1 Base Setup |
 | GPS Receiver | | Leica | SR510 | Supported | |
 | GPS Receiver | | Leica | SR520 | Supported | |
 | GPS Receiver | | Leica | SR530 | Supported | |
 | GPS Receiver | | Ashtech / Thales | Thales MobileMapper (CE.NET 4.2) | Supported | Installing FieldGenius on a Magellan MobileMapper CX Data Collector |
 | GPS Receiver | | Trimble | Trimble GeoXT (PocketPC) | Supported | Trimble GeoXT |
 | GPS Receiver | radio | Javad | Triumph 1 | Supported | Javad Triumph Base Javad Triumph Rover |
 | GPS Receiver | NTRIP | Javad | Triumph 1 | Supported | Javad Triumph Rover |
 | GPS Receiver | NTRIP | Geomax | Zenith 10/20 | Supported | Uses Zenith 10/20 driver |
 | GPS Receiver | Radio | Geomax | Zenith 10/20 | Supported | Uses Zenith 10/20 Driver |
 | GPS Receiver | | Ashtech / Thales | Z-Extreme | Retired | Retired in version 3.2.0 |
 | GPS Receiver | | Ashtech / Thales | Z-FX | Retired | Retired in version 3.2.0 |
 | GPS Receiver | | Ashtech / Thales | Z-Max | Retired | Retired in version 3.2.0 |
 | GPS Receiver | | Ashtech / Thales | Z-Surveyor | Retired | Retired in version 3.2.0 |
 | Total Station | | Pentax | 323 | Supported | Pentax, Com1,1200,8,none,1 |
 | Total Station | | Nikon | 330 | Supported | Nikon New. 9600,none,8,1. Make sure it's a Nikon cable. Ensure Ext Comm mode is "Nikon." On Total Station go to: Menu button, 3:Settings 9:Other, and set "Display" to "Normal. |
 | Total Station | | Geodimeter | 400 | Supported | Using the iPAQ requires a setting of 1.7.2.2400 for the baud rate. |
 | Total Station | | Pentax | 425 | Supported | Pentax Total Station Connection Guide |
 | Total Station | | Geodimeter | 440 | Supported | Geodimeter, Manual Trigger 1200, Even, 7,1 |
 | Total Station | | Geodimeter | 510 | Supported | Geodimeter, Auto Trigger v2, 1200, Even, 7,1 Setup Guide |
 | Total Station | | Geodimeter | 650 | Supported | Trimble Geodimeter GEO 650 Setup |
 | Total Station | Robotic | Geodimeter | 4400 Robot | Not Supported | |
 | Total Station | | Geodimeter | 506 (non-servo) | Supported | Geodimeter, Auto Trigger v1, 1200, Even, 7,1 |
 | Total Station | | Sokkia | 550 RX | Supported | Set Advanced and Bluetooth |
 | Total Station | Direct | Geodimeter | 5600 Direct | Supported | Trimble Geodimeter 5600 Direct Setup |
 | Total Station | Robotic | Trimble | 5600 Robot | Supported (See notes) | Version 5.0.1 MAY the last version that works but we have not been able to confirm. Trimble Geodimeter 5600 Robotic Setup Trimble Geodimeter 5600 Direct (Non Robotic) Setup |
 | Total Station | | Trimble | 5600 Servo | Supported | |
 | Total Station | Robotic | Geodimeter | 600 Robotic | Supported | Trimble Geodimeter GEO 600 Setup |
 | Total Station | | Geodimeter | 600 Servo | Supported | Geodimeter, Auto Trigger v2, 1200, Even, 7,1 |
 | Total Station | Robotic | Topcon | 805a Robot | Supported | Need to intiate RC-2 search from button on RC-2 |
 | Total Station | | Topcon | APL-1A | Supported (See Notes) | Limited search capabilities. Topcon AP-L1A Robotic Connection Guide Topcon AP L1A Setup for EVR |
 | Total Station | | Nikon | C 100 | Supported | Nikon , New, 4800,none,8,1 |
 | Total Station | Robotic | Sokkia | CX-105 | Supported (See Notes) | Not internally tested yet but works with Sokkia SET advanced driver with no support for Guidelights or leveling or TOPCON ES driver. |
 | Total Station | | Leica | Disto A6 | Supported | Leica Disto A6 Guide Connect Evidence Recorder 4.0 to Leica Disto A6 |
 | Total Station | | Nikon | DTM 332 | Supported | Sokkia, Set Basic, 4800, none, 8, 1, ext. comm = "SET" |
 | Total Station | | Nikon | DTM 720 | Supported | Sokkia, Set Basic, 1200, none, 8, 1, ext. comm = "SET" |
 | Total Station | | Nikon | DTM 821 | Supported | Sokkia, Set Basic, 4800, none, 8, 1, ext. comm = "SET" |
 | Total Station | | Nikon | DTM 831 | Supported | Sokkia, Set Basic, 1200, none, 8, 1, ext. comm = "SET" |
 | Total Station | | Zeiss | ELTA R50 | Supported | Zeiss Elta R50 |
 | Total Station | | Zeiss | ELTA S10 | Supported | |
 | Total Station | | Zeiss | ELTA S20 | Supported | |
 | Total Station | Robotic | Topcon | ES | Supported | |
 | Total Station | | Topcon | ET 2 | Supported | |
 | Total Station | Robotic | Focus | Focus 10 | Retired | Radio range limited. Version 4.3.2 is the last version that is reported to work without connection issues. This model is very similar to a Trimble 5600. Trimble Geodimeter 5600 Robotic Setup Trimble Geodimeter 5600 Direct (Non Robotic) Setup |
 | Total Station | | Topcon | GPT 2003 | Supported | Topcon, Non-Robotic, 1200,even,7,1 |
 | Total Station | | Topcon | GPT 2004 | Supported | Topcon, Non-Robotic, 1200,even,7,1 |
 | Total Station | | Topcon | GPT 2005 | Supported | Topcon, Non-Robotic, 1200,even,7,1 |
 | Total Station | | Topcon | GPT 2006 | Supported | Topcon, Non-Robotic, 1200,even,7,1 |
 | Total Station | | Topcon | GPT 3007W | Supported | Topcon, Non-Robotic, 1200,even,7,1, use baud 19200 for Bluetooth |
 | Total Station | | Topcon | GPT 8205a | Supported | robotic driver, 9600, 8, none, 1*radio in direct** |
 | Total Station | Robotic | Topcon | GPT 9003A | Supported | Topcon GPT-9003A & FC-2200 (Robotic) |
 | Total Station | | Topcon | GPT 9003A with Topcon FC2200 | Supported | Topcon GPT-9003A & FC-2200 (Robotic) Topcon GPT-9003A & FC-2200 (Direct) |
 | Total Station | | Sokkia | GSR2700IS | Supported | |
 | Total Station | | Topcon | GTS 200 | Supported | Topcon, Non-Robotic, 1200,even,7,1, use baud 19200 for Bluetooth |
 | Total Station | | Topcon | GTS 212 | Supported | Topcon, Non-Robotic, 1200,even,7,1, use baud 19200 for Bluetooth |
 | Total Station | | Topcon | GTS 220 | Supported | Topcon, Non-Robotic, 1200,even,7,1 |
 | Total Station | | Topcon | GTS 225 | Supported | Topcon, Non-Robotic, 1200,even,7,1 |
 | Total Station | | Topcon | GTS 226 | Supported | Topcon, Non-Robotic, 1200,even,7,1 |
 | Total Station | | Topcon | GTS 230W | Supported | Topcon, Non-Robotic, 1200,even,7,1 |
 | Total Station | | Topcon | GTS 300 | Supported | Topcon, Non-Robotic (Delay), 1200,even,7,1 |
 | Total Station | | Topcon | GTS 303 | Supported | Topcon, Non-Robotic (Delay) or Non-Robotic, 1200,even,7,1, Must use REC A, and ACK Mode set to Standard. |
 | Total Station | | Topcon | GTS 304 | Supported | Topcon,Non-Robotic, 1200,even,7,1, Must use REC A, and ACK Mode set to Standard. |
 | Total Station | | Topcon | GTS 312 | Supported | Topcon,Non-Robotic, 1200,even,7,1, Must use REC A, ACK = Yes and EOF set to Yes. |
 | Total Station | | Topcon | GTS 3B | Supported | |
 | Total Station | | Topcon | GTS 3C | Supported | Topcon,Non-Robotic, 1200,even,7,1, Must use REC A, ACK = Yes and EOF set to Yes. |
 | Total Station | | Topcon | GTS 4 | Supported | |
 | Total Station | | Topcon | GTS 605 | Supported | Topcon,Non-Robotic, 1200,even,7,1 |
 | Total Station | | Topcon | GTS 800 | Supported | Topcon,Non-Robotic, 1200,even,7,1 |
 | Total Station | Robotic | Topcon | GTS 800 Robot | Supported | Topcon,Non-Robotic, 1200,even,7,1 |
 | Total Station | | Topcon | GTS 8000 series | Supported | Topcon GPT 8003 Guide for RC-2 Topcon GPT 8003 Guide for Radios |
 | Total Station | Robotic | Topcon | GTS 815A | Supported | Topcon GTS 815A Setup for Radios Topcon GTS 815A Setup for RC-2 |
 | Total Station | Robotic | Topcon | GTS 823A Robot | Supported | Topcon, Robotic, 9600,none,8,1 |
 | Total Station | | Topcon | GTS-302D | Supported | Topcon, non-robotic, 1200,7,1 |
 | Total Station | | Leica | Leica Builder 400 Series and 500 Series | Supported | TPS Series (GSI) 19200, none, 8 and 1, limited to reflectorless only |
 | Total Station | | Leica | Leica Builder R100M/R200M Power | Supported | TPS Series (GSI) 19200, none, 8 and 1 |
 | Total Station | | Nikon | Nikon NIVO 5 | Supported | Nikon New. 9600,none,8,1. Make sure it's a Nikon cable. Ensure Ext Comm mode is "Nikon." On Total Station go to: Menu button, 3:Settings 9:Other, and set "Display" to "Normal. |
 | Total Station | | Nikon | Nikon NIVO 3 | Supported | Nikon New. 9600,none,8,1. Make sure it's a Nikon cable. Ensure Ext Comm mode is "Nikon." On Total Station go to: Menu button, 3:Settings 9:Other, and set "Display" to "Normal. |
 | Total Station | | Nikon | NPL 332 | Supported | Sokkia SET Advanced Series at 4800, none,8, 1. Make sure it's a Nikon cable. Ensure Ext Comm mode is "SET" |
 | Total Station | | Nikon | NPL 352 | Supported | Sokkia SET Advanced Series at 4800. or 9600, 8, none,1. Make sure it's a Nikon cable. Ensure Ext Comm mode is "SET" |
 | Total Station | | Nikon | NPL 362 | Supported | Nikon New, 9600, 8, none, 1 |
 | Total Station | | South | NTS 325 | Supported | South, NTS, 4800,even,7,1 |
 | Total Station | Robotic | Topcon | OS | Supported | |
 | Total Station | | Pentax | PCS 325 | Supported | Pentax, All Models, 1200, none,8,1 |
 | Total Station | | Sokkia | PowerSet SET 4010 | Supported | Sokkia SET Basic Series at 1200, none,8, 1, can't set plate reading |
 | Total Station | Robotic | Topcon | QS | Supported | Similar to Topcon 9000. TtlStn=SS Wireless, Ch 2, FG=TopCon, Robotic, Port BT, RC None, Radio SS Ch 2 Topcon GPT-9003A & FC-2200 (Robotic) TopCon QS & FC2500 Bluetooth COnnection Guide |
 | Total Station | | Pentax | R-322N | Supported | |
 | Total Station | | Ruide | RTS 860 | Supported (see Notes) | Nikon New, 4800, 8, none, 1 |
 | Total Station | | Trimble | S6 Robot | Not Supported | |
 | Total Station | | Sokkia | SET 3030R3 | Supported | Sokkia SET530R3 Guide |
 | Total Station | | Sokkia | Set 5E | Supported | be sure to tumble scope before connecting Sokkia SET530R3 Guide |
 | Total Station | | Sokkia | Set 6F | Supported | SET Basic, 9600/8/none/1 |
 | Total Station | | Sokkia | Set530R3 | Supported | Sokkia SET530R3 Guide |
 | Total Station | Direct | Sokkia | SRX | Supported | Sokkia SRX Setup (Direct Connection) |
 | Total Station | Robotic | Sokkia | SRX Robot | Supported | Sokkia SRX Setup (Robotic Connection) |
 | Total Station | | Leica | T1010 | Supported | Leica, TPS Series (GSI-8), 9600, none, 8,1 |
 | Total Station | Direct | Leica | TCR 307 | Supported | Leica TCR 307 Settings |
 | Total Station | | Leica | TCR 407 | Supported | Leica TCR 307 Settings |
 | Total Station | | Leica | TCR 703 | Supported | Leica TCR 703 Auto Guide |
 | Total Station | | Leica | TCR 805 | Supported | Leica TC 805 Guide |
 | Total Station | Robotic | Leica | TPS 1100 | Supported | Leica TPS TCRA 1100-Series Guide |
 | Total Station | Direct | Leica | TPS 1200 | Supported | Leica RX1250 & TPS 1200 Prism Offsets Leica RX1250 & TPS 1200 Direct |
 | Total Station | Robotic | Leica | TPS 1200 | Supported | Leica RX1250 & TPS 1200 Robotic Connecting a Leica TPS1200 Robotic Total Station to Evidence Recorder |
 | Total Station | | Leica | TPS 1203 | Supported | Leica TPS TCRP 1203 Leica TPS TCRP 1203 Bluetooth Guide |
 | Total Station | | Leica | TPS 300 series | Supported | |
 | Total Station | | Leica | TPS 700 series | Supported | |
 | Total Station | | Leica | TS-02/TS-09 Flexline | Supported | Leica Flexline Setup Guide |
 | Total Station | | Leica | TS11 | Supported | Installs onboard |
 | Total Station | | Leica | TS12 | Supported | |
 | Total Station | | Leica | TS15 | Supported | Installs onboard or on a Viva Data Collector. Version 6.0.3.5 and newer do not require Extended Geocom License. Connecting a Leica CS15 to a Leica TS15 using MicroSurvey FieldGenius Instruction Guide |
 | Total Station | | Pentax | V-200 | Supported | Pentax, All Models, com 1, 1200, none, 8,1 Signal Control: OFF (default is ON), XON/XOFF: OFF (default is ON) |
 | Total Station | | Geomax | Zoom 20/30 | Supported | |
 | Total Station | Robotic | Geomax | Zoom 80 | Supported | Requires Geocom authorization. Use TPS 1200 guide but adapt your settings for the data collector that is in use. Geomax Zoom 80 Robotic Connection Guide Leica RX1250 & TPS 1200 Direct |
 | | Direct | Geodimeter | 5600 | Supported | Trimble Geodimeter 5600 Direct Setup |
 | | | Leica | TCR 803 | Supported | Leica TCR 803 Guide |