MicroSurvey Software Inc
HOME | PRODUCTS | SUPPORT | NEWS | BUY | TRAINING | JOBS
FIND A DEALER | PORTAL


Quick Links
Layout Home

Top Features
Version Details
Q & A
Supported Hardware
Demo and Try it

Videos
> New in V2
> MEP Module
> Video Scanning

Pricing
> US
> Canada
> International

Purchase Options

Dealers
> Authorized Dealers
> Become A Dealer



Top Features



  Contractor Friendly
  Streamlined interface with two modes: Layout and As-built.
    Layout mode includes all the tools you need to locate points, lines, arcs, and DXF drawing entities.
  As-built mode includes all the tools you need to perform a topographic survey or to collect as-built data. Measure and store points that can be exported for use in CAD systems, or import the data directly into MicroSurvey Point Prep.
    Watch Overview Movie


  Easy Layout
  Graphically stake points with directional grids, compass, or map mode.
  Graphically stake DXF cad drawings by selecting DXF entities from the map screen.
  Staking list allows you to manage your day's work by selecting the points you plan on staking and Layout will automatically guide your process.
    Stake point routine can find the next nearest point to your current prism or GPS position for you automatically.
    Error checking is built in and warns you when you store a layout position that doesn’t meet your error tolerances preventing accidental errors at the job site.
    Cut sheet generator creates a layout report that summarizes what points have been located along with point deviations and cut and fill values.
      Watch Overview Movie


  MEP Module
  The MEP module for MicroSurvey Layout provides the user with advanced but easy to use tools for laying out points on floors, walls, ceilings and pipe penetrations using a simple laser dot. Using the non-prism mode on your instrument, MicroSurvey Layout will automatically iterate several measurements and determine where the true surface is located and adjust the layout location automatically. Your instrumentís laser dot will mark the spot!
  Four different measurement modes are available:
  • Point on Floor
  • Point on Ceiling
  • Point on Wall
  • Pipe Penetration
  This functionality is available for the Leica TS15, Leica Nova 50, Geomax Zoom80, Leica iCON 50, and the Leica 3D Disto. The MEP module can be added to either MicroSurvey Layout or MicroSurvey Layout Pro.
      Watch Overview Movie


  Video Stream Point Scanning
  Multiples practical scanning methods including rectangular, polygonal, full dome, and half dome (Ceiling/Floor mode)
  Using total station onboard cameras to easily define complex scan areas.
  Finish scan data transferring and exporting in one simple click.
    Automatically determines scan resolution based on distance measurements.
    Easily filter out unwanted background areas.
      Watch Overview Movie


  Easy Plan Entry
  Built-in Plan entry tool allows you to easily take design measurements from a paper plan and enter them directly into Layout to create a digital version of the drawing.
  Work in feet, feet and inches, fractions, or metric units.
  Coordinate points are computed for you automatically as you enter measurements.
    Create lines and arcs along with points at the same time as you enter plans.
    Template creator allows you to save your entered plan so it can be used in other projects.
      Watch Overview Movie


  Easy Setup
  Reference Point routine allows you to measure to two or more known points to establish your total station location so you can begin to work quickly.
  Reference Point Check allows you to confirm at any time during your workday that your total station position is still valid and accurate.
  Check Point routine can also be used to check into other known points to confirm that your total station position is accurate and correct.
    Remote Benchmark allows you to shoot a known point so a known elevation can be transferred to your current total station position.
      Watch Overview Movie


  Offsets and Point Patterns
  Lines and arcs can be offset to the left or right or both by a specific distance.
  Compute points down and out from a line or arc.
  Partition lines or arcs by defining a distance, or a number of divisions along the line or arc.
    Compute point offsets between points.
    Input point patterns and then apply them to points in your project for layout.
      Watch Overview Movie


  As-built and Topographic Tools
  As-built routines are built-in so you can measure existing conditions for as-built reports or drawings.
  Easily record points with elevation that can be exported to other third party applications.
  Record data for cut / fill analysis, volume calculations or DTM model creation.
    Generate line work as you measure. Create a picture at the job site while you work.
    Use GPS or your Total Station to measure and record your points.
      Watch Overview Movie


  Road Alignment Layout
  Input alignment data from paper drawings into the built alignment editor.
  Input horizontal alignment, vertical profiles and templates.
  Easy to use stakeout tools
      Watch Overview Movie


  Advanced Display and Platforms
  Easy to use menu structure makes finding things a breeze.
  Two modes Layout and As-built separate the layout and as-built process making it more streamlined and intuitive to use.
  Easy to use map screen has all the tools you need to layout data and collect as-built details.
    Easy to use Total Station and GPS toolbars give you all the instrument control tools in one place directly in the map screen.
    Live graphics screen allows you to pick data from the map screen for layout.
    MicroSurvey Layout can be installed and used on Laptops, Tablet computers, and Windows Mobile devices.
    Both portrait and landscape devices supported
    Common look and feel across all platforms


  Equipment Support
  Conventional non-robotic instruments supported
  Robotic instruments supported
  GPS Base and Rover systems supported
    Network corrected GPS Rover systems supported
    Leica 3D Disto support
      Watch Overview Movie


  Desktop Companion
  Open Autodesk DWG and DXF files with MicroSurvey Point Prep and create points quickly from the digital CAD drawing.
  Export and upload points directly to MicroSurvey Layout for layout at the job site
  Export and upload a CAD background file (DXF) for use with MicroSurvey Layout
    Create surface files that can then be uploaded and used with MicroSurvey Layout.
    Download layout data from MicroSurvey Layout and create cut sheet reports
      Download as-built data from MicroSurvey Layout and prepare a drawing file.
      Download topographic data from MicroSurvey Layout and prepare a drawing file, compute volumes, create contours, or create a DTM model.
      Watch Overview Movie
 
| Contact | | Terms of Services | | End User License Agreement | | Demo Install / Uninstall | News in RSS RSS News | Company | Jobs |
MicroSurvey, FieldGenius, OfficeSync, and MapScenes are registered with the U.S. Patent and Trademark Office by MicroSurvey Software Inc.
Powered by Autodesk Technology, and AutoCAD are registered trademarks of Autodesk, Inc.  
© 2012 MicroSurvey Software Inc.