Download FieldGenius 2007

November 28 , 2006

Current Version - FieldGenius 2007 Version 3.0.1

The FieldGenius 2007 download contains all the program files needed to run FieldGenius. Simply select the download for your data collector by locating it below. If you are using FieldGenius with a GPS receiver you will also need to install the Datum Grid Editor and extract geoid files for your area.

Note: If you have FieldGenius 2007 already installed and you want to update it to the current version, you can do this quickly by downloading a "Quick Update" file.

What Changed in this Version?

Are you Upgrading from FG 2004 or FG 2005?

Are you Upgrading from FG 2006?

You might also need: 
FieldGenius Tablet Edition   Datum Grid Editor   FieldGenius Manual  MicroSurvey Transfer

MicroSurvey Tracker Xtreme

If your Tracker is red, then use this install.

Download Single EXE

There are two versions of FieldGenius 2007 for the Tracker.

Standard Keypad

You have a standard keypad if you have an ESC key in the lower right corner of your keypad. The picture to the left has a standard keypad.

Download Single EXE

Customized Keypad

You have a customized keypad if you have a Back Space key in the lower right corner of your keypad.

Download Single EXE

Archer

The Archer runs the Mobile 5.0 install.

Allegro CE

The installation Allegro CE is in two parts.  The Standard/Advanced/Robotics module must be installed.  The GPS Module files are only necessary if you want the Datums & Coordinate systems installed.

This install will work with both the Allegro CE, and the Allegro CE.Net version.

Allegro CE-Single EXE

Allegro CE GPS-Single EXE

Allegro CX

Allegro CX Mono or Color -Single EXE

** If you use the Allegro CX Color model you will need to make sure you have the 1.06 version of the OS installed.

----------------------------------------------------

Pocket PC

(3150/3600/3800/3950/
2210/2215/5450/5550/hx2495/
Dell/ RECON/Archer/Other Pocket PC devices)

(Panasonic Pocket PC requires a different install, use the one listed for the Panasonic Toughbook)

Download Single EXE

Windows Mobile 5.0

Download Single EXE

Panasonic Toughbook

Important Note: Older Panasonics running Windows CE 3.0 (start button at bottom) must have ROM version V1.00L21E installed to run FG2006.  Check the ROM version under Start -> Settings -> Control Panel -> System -> Settings -> Version

Download Single EXE - old style with Windows CE and start button at the bottom of the screen.

Download Single EXE - new style with Pocket PC and start button at the top of the screen.

DAP MicroFlex

The installation is in three parts. The main program files must be installed followed by the support file. The GPS install is optional, it is only needed if you want to use a GPS receiver with FieldGenius.

Download Single EXE - Main Files

Download Single EXE - Support Files

Download Single EXE - GPS Files

Symbol 8100

The Symbol 8100 runs the Pocket PC install.

Ranger Running Windows CE 3.0

The CE 3.0 install is in two parts. The GPS install is optional, it is only needed if you want to use a GPS receiver with FieldGenius.

Standard/Advanced/Robotics Module. Single EXE

GPS Module - Single EXE

Ranger Running Windows CE.NET

The CE.NET install includes everything.

Download Single EXE

Ranger Running Windows Mobile 5.0

Download Single EXE

Recon

Older units have the Windows CE.NET operating system, where as new versions ship with the Pocket PC operating system.

Windows CE.Net Single EXE (Start button at the lower left corner of screen.)

Pocket PC Single EXE (Start button at the top left corner of screen.)

Topcon FC-100

Download Single EXE

FC 1000

FieldGenius notes for the Topcon FC 1000 Note: 32MB of free memory is required. The standard 19.6MB version will not run FG 2006

FC 1000 Standard/Advanced/Robotics Module. Single EXE

FC 1000 GPS Module - Single EXE

FC 2000

FC 2000 - Single EXE