|
Topcon FC1000 FieldGenius Installation:
The installation is in two parts. The Basic/Pro/Robotics
module must be installed. The GPS Module files are only
necessary if you want the Datums & Coordinate systems
installed.
Install
the Basic/Pro/Robotics module
Install
the optional GPS Files
Note: the installer for the FC1000 is a bit unreliable.
We use the Installshield installation system, and they do
not seem to support this unit very well. After installing
the GPS files, please check to make sure that they were installed
in a Mapping directory below the FieldGenius Programs directory.
To clarify, the path to the GPS files on the FC1000 must be:
\Storage Card\MicroSurvey FieldGenius\Programs\Mapping
We have seen the installer create a directory on the root
of the Storage Card called "MicroSurvey FieldGenius GPS
Files". If this happens, please create a Mapping
directory and move the files into it. Please call MicroSurvey
if you have any questions.
Back to Installations
|
